• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

"Reference" TDA1541A DAC with I2S-BUS architecture

Surface Finish for future PCB´s

  • ENIG - Electroless Nickle/Immersion Gold

    Votes: 93 48.7%

  • Immersion Silver

    Votes: 54 28.3%

  • Immersion Tin

    Votes: 24 12.6%

  • OSP - Organic Solderability Preservatives

    Votes: 20 10.5%
  • Total voters
    191
Status
Not open for further replies.
Jump to Latest
#964
#966
beardman said:
Hello
Please tell me...the best dealer to buy a TDA1541a
Best Bjarne
Click to expand...

Hi Bjarne,

If you are not going to buy whole Cd player, please PM me, I have few different TDA1541 and TDA1541A as spares.
Some of TDA1541 were removed from players (as Marantz CD 94 and Philips CD960), some TDA1541A are new - I can check ones on my operational CD player to be sure those are OK.


Best regards
Saulius
 
#968
Bargain Sale

Bargain Sale​
​
​


Here you could order two of my ready build Red Baron V4.0 DAC test modules,
witch includes the new 3.3V I2S attenuator and free running DEM oscillator modification.

Also on board is the Tube-I-zator bandwidth limiting modification.

Main Parts

- DEM decoupling with Cornell Dubilier Stacked Metallized Film Capacitors 1µF/16V FCA 1210 caps
- PRP resistors
- Nichicon FPCAP R7 series capacitors


for the special price of

$55 each

including
Worldwide shipping and paypal fee

An externally hosted image should be here but it was not working when we last tested it.




If you are interested, please send me a PM.

:wave:

​
 
#969
decoupling caps... According to the spreadsheet BOM

Wima MKS02; 0.22µF 63V
Wima MKS02; 1µF 50V

these 16 caps can be replaced with ;

Cornell Dubilier 1µF/16V FCA 1210 caps- Mouser Part No.: 598-FCA1210C105M-G2

I only see 14 smt caps on the front of the board.
What don't I see?
 
#973
Mouser cart

I've got all the mouser parts (I can find on mouser) in this cart...

https://ca.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=e5f3e3e479

You guys are more than welcome to copy it... I haven't double checked it yet - but have removed parts from the original BOM (not needed with the latest mods).


Anyone have complete red baron build? I'd like to see them. I don't see how I can fit all these circuit boards into one enclosure.
 
#975
dvb-projekt said:
Bargain Sale​
​
​


Here you could order two of my ready build Red Baron V4.0 DAC test modules,
witch includes the new 3.3V I2S attenuator and free running DEM oscillator modification.

Also on board is the Tube-I-zator bandwidth limiting modification.

Main Parts

- DEM decoupling with Cornell Dubilier Stacked Metallized Film Capacitors 1µF/16V FCA 1210 caps
- PRP resistors
- Nichicon FPCAP R7 series capacitors


for the special price of

$55 each

including
Worldwide shipping and paypal fee

An externally hosted image should be here but it was not working when we last tested it.




If you are interested, please send me a PM.

:wave:

​
Click to expand...


Only one left!​
 
Status
Not open for further replies.
Top Bottom