Hi Chris,
Rather enthusiastic response actually, I'm surprised.
I wanted to offer something that can be finished without mucking around looking for parts and trying to get an enclosure together to hold it. This is complete (even includes little rubber buttons as feet for the bottom 🙂 ).
Due to the demand, I have decided to order some more boards but I have something else that I want to propose. I'll do that a bit later tonight.
The cases are made by yours truly 🙂
Nothing fits better than a handmade custom fit, right? 😉
You will have no problem veneering the box. They are basic, unpainted and sanded smooth. They are not perfect - some filling may be required if you are looking to do a high class paint job on it, but the price is right 🙂.
Good idea, Chris!
This is linked over on the PE Tech Talk forum. 😉
All-in-one measuring jig - Techtalk at Parts-Express.com
This is linked over on the PE Tech Talk forum. 😉
All-in-one measuring jig - Techtalk at Parts-Express.com
Hi Ed,
Thanks, but posting at another site is your idea. I have no problems at all with this. This is one of those kits that makes life so much easier for experimenters. I wish a kit like this was available when I started.
Hi John,
The best part of this project is that it is useful and easy to use.
-Chris
Thanks, but posting at another site is your idea. I have no problems at all with this. This is one of those kits that makes life so much easier for experimenters. I wish a kit like this was available when I started.
Hi John,
Am I that grouchy? 😱
I think you nailed that! Really, what you have put together may be a simple and straight forward circuit. But, it's finished very, very well as well as eliminates the hurdles of obtaining parts that actually fit the board. The front panel shows well, and you know without a doubt when it's on. The user interface is both attractive and well thought out. My feeling is that members may leave it out because it is attractive.
The best part of this project is that it is useful and easy to use.
-Chris
Hi Critofur,
John mentioned he is getting more boards made. We expect to hear more from him on this soon. He may also have a couple more spare.
-Chris
John mentioned he is getting more boards made. We expect to hear more from him on this soon. He may also have a couple more spare.
-Chris
Hi Chris,
No, I was refering to the number of people that want this jig - it really surprised me. I thought I'd be lucky to get rid of half the boards...🙂
Now I'm up to my eyebrows...😱
😀
Very soon. PM me - there is still one that is on the fence.
Thanks Ed 🙂
Paid...
John, ya's got doolars...I think some green ether went your way...if the process went well. Paypal has "completed" status in my account re: invoice.
I hope the process worked...😎
John, ya's got doolars...I think some green ether went your way...if the process went well. Paypal has "completed" status in my account re: invoice.
I hope the process worked...😎
If one left, I would like to get it
Hi MJL21193,
If you have one left, I will take it (gladly)
Cheers
Peter
Hi MJL21193,
If you have one left, I will take it (gladly)
Cheers
Peter
Got it, thanks 🙂
All out for now Peter but more soon. Send me a PM if you are still interested.
I should have some new boards by early next week for the jig. Please PM me if you are interested.
Also I have had several inquiries about the microphone posted earlier and would like to see if there is any interest in this as a kit also:
It uses the WM-61A capsule and has a built in battery powered preamp. It is perfect for the speaker testing jig - just plug it in and turn it on.
Post you thoughts here.
I will be ordering a limited number of PC boards for these to start. I will post back here with pricing as soon as I have that pinned down.
Also I have had several inquiries about the microphone posted earlier and would like to see if there is any interest in this as a kit also:
It uses the WM-61A capsule and has a built in battery powered preamp. It is perfect for the speaker testing jig - just plug it in and turn it on.
Post you thoughts here.
I will be ordering a limited number of PC boards for these to start. I will post back here with pricing as soon as I have that pinned down.
Hi John,
Any idea what the cost will come in at? It does look like a nice project.
You do such a good job at packaging, impressive.
-Chris
Any idea what the cost will come in at? It does look like a nice project.
You do such a good job at packaging, impressive.
-Chris
PM sent 🙂
Regarding the mic kit - can you test capsules vs a calibrated mic or such?
I've built a few DIY mics with Panasonic capsules - I just use them without power or pre-amp straight to my sound card. Works OK, maybe greater dynamic range with the power/preamp setup?
It'd be awesome if we had some way of having (at least close to) calibrated mics for cheaper. I've got a few mics, none calibrated.
The only way I see that happening is if we find that a certain "batch" of WM61A capsules are all pretty close, so just one needs to be calibrated and then if we buy the kit, we can all use the same cal file with decent results?
First, all kits were shipped today. Let me know when you get them. 🙂
Hi Chris,
I'm working on it - I need to come up with an easier way to make the case. The original is wood, which is fine for a prototype by doesn't fit for making multiples - it would be too expensive.
I don't think calibration is really needed for the DIY use of a measurement mic. There is a generic cal file available for the WM-61A capsule that flattens the HF response. The WM-61 is very linear in anyway.
SPL accuracy is not really critical, you want to be able to measure each drivers output relative to the other drivers and measure each speakers output relative to the other speaker.
If calibration is something you feel you need, the mic/preamp unit can be sent out for calibration, just like any other mic. The calibration comes in the form of a file they you input to the measurement software you're using (like Speaker Workshop or HOLMImpulse).
Hi Chris,
I'm working on it - I need to come up with an easier way to make the case. The original is wood, which is fine for a prototype by doesn't fit for making multiples - it would be too expensive.
I don't think calibration is really needed for the DIY use of a measurement mic. There is a generic cal file available for the WM-61A capsule that flattens the HF response. The WM-61 is very linear in anyway.
SPL accuracy is not really critical, you want to be able to measure each drivers output relative to the other drivers and measure each speakers output relative to the other speaker.
If calibration is something you feel you need, the mic/preamp unit can be sent out for calibration, just like any other mic. The calibration comes in the form of a file they you input to the measurement software you're using (like Speaker Workshop or HOLMImpulse).
Last edited:
Ok, some interest but not as much as I expected. It would be nice to see a few more hands...🙂
I'm not sure just how good the mic input on a soundcard is - they are not supposed to be very good but it is probably good enough for speaker testing. I've never tried to use one for that before.
The preamp I have in this microphone is VERY good though and has a couple of handy features for measurement. First it is ultra portable - it is a self contained mic with preamp. Heck, when you are done measuring you can even do some Karaoke with it, just plug it in to any amp and sing along...😀
It has 2 gain settings, 20db and 10db for nearfield measurements. It's ultra low noise, battery powered with regulated phantom power for the electret capsule. Low current drain, a 9V battery will last a loooong time.
Enough pitch, I will order a few boards, see what I can scheme up for the case and ask again if there is any serious interest in this unit.
I can say that it has made these kind of measurements very convenient for me, I won't look back.
- Status
- Not open for further replies.