Hi Everyone.
Can someone please help me with these questions.
1. What is the Gain of F5 Turbo V3(44V Rail voltage) and Aleph 2(55 V Rail voltage).
2. What is the Gain of AV Receiver SR6007 (https://www.marantz.com/en-us/product/av-receivers/sr6007)
3. I'll be using PRE OUT from AV receiver to feed F5T and Aleph2. Can I use PRE OUT SW1(Subwoofer1) and SW2(Subwoofer2) as input to Aleph2?
Thank you
Can someone please help me with these questions.
1. What is the Gain of F5 Turbo V3(44V Rail voltage) and Aleph 2(55 V Rail voltage).
2. What is the Gain of AV Receiver SR6007 (https://www.marantz.com/en-us/product/av-receivers/sr6007)
3. I'll be using PRE OUT from AV receiver to feed F5T and Aleph2. Can I use PRE OUT SW1(Subwoofer1) and SW2(Subwoofer2) as input to Aleph2?
Thank you
Attachments
F5-T looks to be 22db, look at the write up at firstwatt.com. Aleph 2 single ended connection is 26db. Don't know about the AVR stuff..
The SR6007 preamp section gain is 15.6dB, power amp section is 27.8dB.
Subwoofer pre-outs are low passed from 250Hz, you can't use it for full range playback.
Subwoofer pre-outs are low passed from 250Hz, you can't use it for full range playback.
Last edited:
Thank you Chris and William
I'll look into Surround Back as it is reassiagnable otherwise feed both Aleph2 and F5T from Front LR.
I'll look into Surround Back as it is reassiagnable otherwise feed both Aleph2 and F5T from Front LR.
I have a sr6005. The surround backs can be reassigned to use zone 2 or to biamp the front mains. If you want to be able to use one or the other use the Zone 2, but you would be somewhat limited in sources. Both sets of preouts would be active in the other setting.
Thank you.
Sorry I have two more questions.
Sorry I have two more questions.
- Can Audyssey adjust Gain if multiple amps connected to AV receiver PREOUT have different gain.
- How can I null Audyssey when listening to Music(Stereo) played through one of sources connected to AV receiver.
Audyssey will do that during auto setup. You also could adjust it manually.
Using direct mode should bypass Audyssey settings. Also turns off the subs. There are other configurations you can do for Audyssey that could limits its control.
Using direct mode should bypass Audyssey settings. Also turns off the subs. There are other configurations you can do for Audyssey that could limits its control.