I have a BOZ I built a year or so ago and am considering adding additonal film bypass caps to the initial design.
The BOZ and many of the Pass designs appear to have 100uf~1000uF electrolytics as bypass/filter caps standing alone. Is there a reason for/against adding smaller value films in parallel to this design (NOT the AC coupling I/O caps)? I may just go ahead and try it, but welcome any insight.
Thank you.
The BOZ and many of the Pass designs appear to have 100uf~1000uF electrolytics as bypass/filter caps standing alone. Is there a reason for/against adding smaller value films in parallel to this design (NOT the AC coupling I/O caps)? I may just go ahead and try it, but welcome any insight.
Thank you.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.