PROBLEM WITH MY MMATS D800.2

[ernie cosillos]

I HAVE A MMATS D800.2 THAT ONCE I POWER UP IT AUTOMATICALLY GOES INTO THERMAL. ANYONE OUT THERE WITH ANY IDEAS?

 

[Perry Babin]

Is the LED designated as the thermal protection indicator or is it simply labeled 'protection'?

Can you post a photo of the inside of the amp?

 

[ernie cosillos]

THE LED IS LABELED THERMAL

 

[ernie cosillos]

I WILL GET A PHOTO TO YOU T'MORROW MORNING.

 

[ernie cosillos]

i HAVE THEPHOTOS OF THE AMP BUT AM A LITTLE CONFUSED A HOW TO POST THEM

 

[blakktalon]

after you select post quick reply, you should see at the bottom it says additional options there is a box that says manage attatchments. click that, and it should as you for file you wanna add.

find it on your computer, and then select open/apply/attach what ever options it gives you. and you should be set

 

[ernie cosillos]

d800.2

hopefuly these pictures give you an idea of what i'm working with

 

[ernie cosillos]

Hey thank you out there for your help on gettting me these pics up!!

 

[Perry Babin]

Is there a small 2-wire component under one of the clamps on the heatsink?

 

[ernie cosillos]

YES THERES A SMALL COMPONENT ATTACHED TO TWO WIRES ATTACHED TO THE HEATSINK

 

[Perry Babin]

Are the wires touching?

 

[ernie cosillos]

THE TWO WIRES CONNECTED TO THE SMALL COMPONENT ARE IN FACT NOT TOUCHING

 

[Perry Babin]

Measure the resistance between the two wires (no power applied).

 

[ernie cosillos]

WHAT WOULD BE A SUITABLE RESISTANCE FOR THE TWO WIRES?

 

[Perry Babin]

What did you measure?

 

[ernie cosillos]

i measured 0.003

 

[Perry Babin]

That's too low. Desolder it and measure the resistance across the leads of the device.