Hello,
it took me again to make myself a new amplifier. This time I took a PCC88 (TESLA) for the input triode and phase shifter. As the final tube, I used 6E5P in triode connection. The result is very encouraging.
Another interesting thing, I used a cheap Chinese switcher (approx. 35€) for the power supply.
Not bad at all...
it took me again to make myself a new amplifier. This time I took a PCC88 (TESLA) for the input triode and phase shifter. As the final tube, I used 6E5P in triode connection. The result is very encouraging.
Another interesting thing, I used a cheap Chinese switcher (approx. 35€) for the power supply.
Not bad at all...
Attachments
6 x 6e5p PSE has around 9W-10W. So the sam power. PP has much better bass, mids and it is no so "sterile" as PSE. This is probably because PSE is one stage and PP is two stage amp.
My bests soundig amp is SE GU50 in penthode with driver E180F in pethode with shade feedback. G2 of GU50 (300V) and G2 of E180F (150V) are regulated. OT is 5.2K. My second best amp is 6C4C in PP - https://www.diyaudio.com/community/threads/6c4c-in-pp-loftin-white.331167/
My bests soundig amp is SE GU50 in penthode with driver E180F in pethode with shade feedback. G2 of GU50 (300V) and G2 of E180F (150V) are regulated. OT is 5.2K. My second best amp is 6C4C in PP - https://www.diyaudio.com/community/threads/6c4c-in-pp-loftin-white.331167/
- Home
- Amplifiers
- Tubes / Valves
- PP amp with 6E5P en PCC88