Hi P-A,peranders said:
I would like to join the wiki for four pcb's, but could not work out how. I am new to all this.
Could you add my name to the list for four boards, please.
My e-mail is: rsotirov@hotmail.com.
Thanks for doing this.
Roumen
Go to the wiki page and sign up. See my sig for the link. Let me know if you want help with this.
I have added a column for email address. As you can see I miss quite many so please enlighten me with a message. If you'll do it via the forum I'll get the username automaticly.
I have added a column for email address. As you can see I miss quite many so please enlighten me with a message. If you'll do it via the forum I'll get the username automaticly.
You click at the link in my sig. Scroll down and click "Click here now to edit this WikiPage". I have done this for you but it's really easy to edit a wiki page.rsotirov said:
Guy's one third of you on the list haven't responded. Please delete your order or confirm it.
Count me in
P-A,
I responded to your e-mail and you also replied back, but the Wiki does not show me as "P-A has gotten e-mail". Should I update the Wiki?
In case you are wondering or can't find my response e-mail, count me in for (4) boards.
- Larry
P-A,
I responded to your e-mail and you also replied back, but the Wiki does not show me as "P-A has gotten e-mail". Should I update the Wiki?
In case you are wondering or can't find my response e-mail, count me in for (4) boards.
- Larry
I'll notice that I have taken a "general pupose" BHC cap but I think I should add footprint also the the low impedance model which have pins in different places. I will of course keep 10 mm snap-in.
Suggested connector is really nice (it's huge!) but it seems that you can't buy this except directly from Phoenix. Would you be interested in if I'll get this for you?
Notice how you can build stack this connector. Notice also the leads which are in zick-zack in order to withstand 800 V.
Notice how you can build stack this connector. Notice also the leads which are in zick-zack in order to withstand 800 V.
Attachments
More info about this connector.
https://eshop.phoenixcontact.se/pho...=1709681&parentUID=852252948&reloadFrame=true
https://eshop.phoenixcontact.se/pho...=1709681&parentUID=852252948&reloadFrame=true
twin pin holes with 4mm spacing would be lovely. 
http://www.riaconnect.com/terminal_detail.asp?category_id=2&subcategory_id=13
http://www.riaconnect.com/terminal_detail.asp?category_id=2&subcategory_id=13
Hi P-A
Supplying the connectors with the PCB's is a good idea. I would be happy for you to do that.
Cheers
Gary..
Supplying the connectors with the PCB's is a good idea. I would be happy for you to do that.
Cheers
Gary..
I have made a column in the wiki for you to fill in the interest of this really nice connector.
P-A
How many connectors are required per board. Do we put that amount in the column on the wiki page or the same number as the boards we want.
Cheers
Gary..
How many connectors are required per board. Do we put that amount in the column on the wiki page or the same number as the boards we want.
Cheers
Gary..
It's 16 poles on each board and since you can build these connectors you can also mount the amount you'll need. If you'll mount from right you can also add connectors.
Please write how many connectors you'll need in total.
Please write how many connectors you'll need in total.
They are rather expensive compared to regular connectors but when I heard the unbargained price I thought it wasn't that painful. I will come back next week with info about this. Remember that the interest list isn't binding yet.
I would prefer if I see the preliminary interest so please sign up even if it turns out that it will be too expensive. Remember that the list isn't binding yet.
- Status
- Not open for further replies.