What would cause this capacitor (C361) to keep blowing. I have had to change this about 3-4 times in the last two days. I am having a problem with getting the board installed in the case without blowing a transistor or capacitor(C361). Bare board on the bench will power up and idle continuously with +/-65v of rail. When installed in the chassis it will draw excessive current or blow capacitors with all of the transistor clamps installed. If I remove certain ones, it may power up and idle.
What is the purpose of C361 capacitor, and what would cause it to blow?
What is the purpose of C361 capacitor, and what would cause it to blow?
Attachments
With the amp out of the heatsink, if you ground the blue wire to the main ground, does the capacitor burn?
Is the insulator damaged under the components that cause the capacitor to burn?
Is the insulator damaged under the components that cause the capacitor to burn?
- Status
- Not open for further replies.