it's the initial quote i got from them Patrick.
I know it's a good price, and for you only 15€ delivery !
😎
I know it's a good price, and for you only 15€ delivery !
😎
It is worth mentioning that you need 2 transformers for a stereo amplifier (2 channels).
So that would be for me €122+€15 delivery.
Also try to confirm if they can bifilar wind the 2 secondaries. If not, contact me by email.
I had developed another solution with Toroidy a few years back to overcome that.
Send Thomas my best regards.
Patrick
So that would be for me €122+€15 delivery.
Also try to confirm if they can bifilar wind the 2 secondaries. If not, contact me by email.
I had developed another solution with Toroidy a few years back to overcome that.
Send Thomas my best regards.
Patrick
PRP group buy ACTIVATED
The group buy for PRP resistors has been started and you will find the thread here. Please post any questions you might have there.
Cheers,
Nic
The group buy for PRP resistors has been started and you will find the thread here. Please post any questions you might have there.
Cheers,
Nic
Tentative participant list for PRP resistors for EUVL F5X build:
Europe
NicMac 2 sets
Mravinsky 2 sets
APK 2 sets
Chalkandtalk 1 set
heinz1 2 sets
JBdV 2 sets
Ramallo 1 set
Studley 1 set
samoloko 1 set
CeeVee 2 sets
Asia
pmchoong 2 sets
Nikon1975 2 sets
qusp 1 set
wktk_smile 1 set
leejh 1 set
johnwmclean 1 set
USA
alazira 1 set
pchw 2 set
horio 2 set
Westley 2 sets
CanAm Man 1 set
Notes: This is a tentative list of members interested in a GB for PRP resistors for a EUVL F5X build (1 set = 1 complete F5X build (dual mono amps + PS)). The GB is run by NicMac, but was suggested by EUVL and kindly made possible by Fitzfish (see post #23). I will post more exact information on composition of a "set" (number and values), pricing and means of distribution/delivery when I have this information.
__________________
- Fred -
It is worth mentioning that you need 2 transformers for a stereo amplifier (2 channels).
So that would be for me €122+€15 delivery.
Also try to confirm if they can bifilar wind the 2 secondaries. If not, contact me by email.
I had developed another solution with Toroidy a few years back to overcome that.
Send Thomas my best regards.
Patrick
Will do Patrick,
I'll check, now with your 2 we are asking for 20 trafos ? is this right Gerhard ?.
Carlos
I have started a GB sheet please confirm your interest there ;
EUVL F5X "Toroidy" Tranformers Europe GB
Last edited:
Will do Patrick,
I'll check, now with your 2 we are asking for 20 trafos ? is this right Gerhard ?.
Carlos
Yes, Carlos, that's correct; with Patrick's participation in this GB we are approaching twenty.
I was asked by PM why I changed the secondary voltage to 16V.
In some countries, the mains supply can vary by some 10% from the 230V nominal.
Going 16V gets us the margin back in case it goes -10%.
In any case we can easily adjust the regulator output voltage, so there is nothing to worry whether 15V or 16V.
😉
Patrick
In some countries, the mains supply can vary by some 10% from the 230V nominal.
Going 16V gets us the margin back in case it goes -10%.
In any case we can easily adjust the regulator output voltage, so there is nothing to worry whether 15V or 16V.
😉
Patrick
Carlos,
may I ask if I can put my name on the group buy sheet for the Toroidy transformers or is this group buy closed? I'm interested in 2 transformers.
I also use transformers from Toroidy (400VA) in my current F5X build and I'm really happy with the quality.
Regards, Uwe
may I ask if I can put my name on the group buy sheet for the Toroidy transformers or is this group buy closed? I'm interested in 2 transformers.
I also use transformers from Toroidy (400VA) in my current F5X build and I'm really happy with the quality.
Regards, Uwe
Last edited:
Among the components I still have to source for the EUVL F5X build, the power supply caps seems to be the most important remaining item.
Does anybody know the footprint, number, size and rating we should be looking for?
I think I read somewhere that the regulation chain is C-R-C-reg-C so I guess we will be looking for 6 caps in total. 25 or 35V rated?
Just some info needed for going shopping!
Cheers,
Nic
Does anybody know the footprint, number, size and rating we should be looking for?
I think I read somewhere that the regulation chain is C-R-C-reg-C so I guess we will be looking for 6 caps in total. 25 or 35V rated?
Just some info needed for going shopping!
Cheers,
Nic
Caps are standard 10mm pitch snap-in, max. 30mm diameter x 50mm height, 8 in total; according to:
http://www.diyaudio.com/forums/pass-labs/183362-f5x-euvl-approach-13.html#post2539692
There were some other discussions about PSU caps; I'll look further.
http://www.diyaudio.com/forums/pass-labs/183362-f5x-euvl-approach-13.html#post2539692
There were some other discussions about PSU caps; I'll look further.
Hey Nic,
Here is a thread from a long time ago, regarding capacitors for the power supply.
PS Caps - Old Thread
You'll definitely want to check with Patrick or someone from the prototyping team, about the cap values. They may have changed since then.
Here is a thread from a long time ago, regarding capacitors for the power supply.
PS Caps - Old Thread
You'll definitely want to check with Patrick or someone from the prototyping team, about the cap values. They may have changed since then.
Thanks, Horio, that were the posts I had in mind.
BTW, @CeeVee:
Are there any news from Toroidy?
BTW, @CeeVee:
Are there any news from Toroidy?
Interest Check Furutech FI 10’s
Davide (Nikon1975) has found a good source for Furutech FI 10’s.
Please let me know your interest and well get the ball rolling, pick and option and quantity.
Shipping cost tbc.
Option 1) 1500 Yen (Approx $19.4US) 24k Gold-Plated
Option 2) 1100 Yen (Approx $14.2US) Rhodium-Plated
MarkLai Option ? X 10pcs
Johnwmclean Option 1 X 1pcs
Davide (Nikon1975) has found a good source for Furutech FI 10’s.
Please let me know your interest and well get the ball rolling, pick and option and quantity.
Shipping cost tbc.
Option 1) 1500 Yen (Approx $19.4US) 24k Gold-Plated
Option 2) 1100 Yen (Approx $14.2US) Rhodium-Plated
MarkLai Option ? X 10pcs
Johnwmclean Option 1 X 1pcs
Last edited:
MarkLai Option ? X 10pcs
Johnwmclean Option 1 X 1pcs
JBdV Option 2 x 2 pcs
what about the counterpart (cable connector), I guess we need them as well???
Johnwmclean Option 1 X 1pcs
JBdV Option 2 x 2 pcs
what about the counterpart (cable connector), I guess we need them as well???
MarkLai Option 2 X 10pcs
Johnwmclean Option 2 X 1pcs
JBdV Option 2 x 2 pcs
> what about the counterpart (cable connector), I guess we need them as well???
Good idea. Suggest pick one and ask Davide to get prices.
John ?
Patrick
Johnwmclean Option 2 X 1pcs
JBdV Option 2 x 2 pcs
> what about the counterpart (cable connector), I guess we need them as well???
Good idea. Suggest pick one and ask Davide to get prices.
John ?
Patrick
- Status
- Not open for further replies.
- Home
- Group Buys
- Potential Other Group Buys related to EUVLs F5X