The Team ship later = 1 ship now = 0
johnwmclean ship later = 2 ship now = 0
AndrewT ship later = 3 ship now = 0
NicMac ship later = 4 ship now = 0
Studley ship later = 5, now =0
heinz1 ship later = 6, now = 0
mravinsky ship later = 7, now = 0
toufu ship later = 8, now = 0
scranton ship later = 9, now = 0
APK ship later = 10, now = 0
Horio ship later = 11, now = 0
Oneoclock ship later = 12, now = 0
Westley ship later = 13, now = 0
pchw ship later = 14, now = 0
jbdv ship later = 16, now = 0 pay now fine with me
Jan
johnwmclean ship later = 2 ship now = 0
AndrewT ship later = 3 ship now = 0
NicMac ship later = 4 ship now = 0
Studley ship later = 5, now =0
heinz1 ship later = 6, now = 0
mravinsky ship later = 7, now = 0
toufu ship later = 8, now = 0
scranton ship later = 9, now = 0
APK ship later = 10, now = 0
Horio ship later = 11, now = 0
Oneoclock ship later = 12, now = 0
Westley ship later = 13, now = 0
pchw ship later = 14, now = 0
jbdv ship later = 16, now = 0 pay now fine with me
Jan
The Team ship later = 1 ship now = 0
johnwmclean ship later = 2 ship now = 0
AndrewT ship later = 3 ship now = 0
NicMac ship later = 4 ship now = 0
Studley ship later = 5, now =0
heinz1 ship later = 6, now = 0
mravinsky ship later = 7, now = 0
toufu ship later = 8, now = 0
scranton ship later = 9, now = 0
APK ship later = 10, now = 0
Horio ship later = 11, now = 0
Oneoclock ship later = 12, now = 0
Westley ship later = 13, now = 0
pchw ship later = 14, now = 0
jbdv ship later = 16, now = 0 pay now fine with me
smyslow = 17, now = 0 pay now also fine for me
johnwmclean ship later = 2 ship now = 0
AndrewT ship later = 3 ship now = 0
NicMac ship later = 4 ship now = 0
Studley ship later = 5, now =0
heinz1 ship later = 6, now = 0
mravinsky ship later = 7, now = 0
toufu ship later = 8, now = 0
scranton ship later = 9, now = 0
APK ship later = 10, now = 0
Horio ship later = 11, now = 0
Oneoclock ship later = 12, now = 0
Westley ship later = 13, now = 0
pchw ship later = 14, now = 0
jbdv ship later = 16, now = 0 pay now fine with me
smyslow = 17, now = 0 pay now also fine for me
No need to pay now, as we do not know th exact shipment cost.
Only when we have all the costs does it make sense for the second payment.
But thanks for the offer,
Patrick
Only when we have all the costs does it make sense for the second payment.
But thanks for the offer,
Patrick
I think we exceeded majority volt.
So we'll wait for the new panels.
The plan is to get them done in 2 weeks.
Let's see,
Patrick
So we'll wait for the new panels.
The plan is to get them done in 2 weeks.
Let's see,
Patrick
Heatsink Update
Guys I’ve had yet another disappointing piece of news from Conrad, there’s is at least another 2 weeks still left in finishing out heatsinks.
I’m frustrated as you all must be about all the hold ups that have taken place, I don’t as a rule like to put pressure on people or businesses to get “paid” work done in the time promised, I think Conrad has now firmly crossed that line, short of sending around the boys.
Sorry yet again to ask for more of your patience.
Guys I’ve had yet another disappointing piece of news from Conrad, there’s is at least another 2 weeks still left in finishing out heatsinks.
I’m frustrated as you all must be about all the hold ups that have taken place, I don’t as a rule like to put pressure on people or businesses to get “paid” work done in the time promised, I think Conrad has now firmly crossed that line, short of sending around the boys.
Sorry yet again to ask for more of your patience.
I can tell you and Mark and I are looking around for our own source of heatsinks for future batches.
Hopefully, we have a smoother project run next time.
Part of being first is minor higup's like this.
😉
Patrick
Hopefully, we have a smoother project run next time.
Part of being first is minor higup's like this.
😉
Patrick
I have a bit of good news for NicMac.
Nic has been asking me in private for a second case for a long time now.
Well, you might be lucky as it looks all parts might meet spec and we might then have one or two sets to spare. In which case Nic will be first on the queue, and if I am not wrong JBL4435 second ?
I have asked John to order two extra sets of Conrad sinks. So as soon as we can confirm the case parts, you can pay for the second case with your second down payment, and have it bulk shpped with the rest, as normal.
Lucky you. 🙂
Patrick
Nic has been asking me in private for a second case for a long time now.
Well, you might be lucky as it looks all parts might meet spec and we might then have one or two sets to spare. In which case Nic will be first on the queue, and if I am not wrong JBL4435 second ?
I have asked John to order two extra sets of Conrad sinks. So as soon as we can confirm the case parts, you can pay for the second case with your second down payment, and have it bulk shpped with the rest, as normal.
Lucky you. 🙂
Patrick
Thank you very much Patrick,
that sounds very, very good indeed!
I will look up how much I have to pay and do the transfer promptly when the specs are confirmed.
Cheers,
Nic
that sounds very, very good indeed!
I will look up how much I have to pay and do the transfer promptly when the specs are confirmed.
Cheers,
Nic
Last edited:
No need to pay now.
Wait till I confirm you have the spare set. And then pay (together with your originally subscribed case) only when we ask for the second downpayment for the GB.
Patrick
Wait till I confirm you have the spare set. And then pay (together with your originally subscribed case) only when we ask for the second downpayment for the GB.
Patrick
No, you are not out. Just second on the list.
With luck, we may have 2 extra available.
Patrick
With luck, we may have 2 extra available.
Patrick
CRC F5X PCB's
EUVL suggested to move discussions here.
I would be interested in trying the simpler CRC solution for the F5X supplies. Several seem to prefer the CRC solution and in particular with a balanced amp topology, with its high intrinsic common-mode noise rejection, it makes a lot of sense - as far as I know. Certainly worth a try anyway.
So if PCBs, and the difficult to source Fukus, could be made available I would be very interested.
Cheers,
Nic
EUVL suggested to move discussions here.
I would be interested in trying the simpler CRC solution for the F5X supplies. Several seem to prefer the CRC solution and in particular with a balanced amp topology, with its high intrinsic common-mode noise rejection, it makes a lot of sense - as far as I know. Certainly worth a try anyway.
So if PCBs, and the difficult to source Fukus, could be made available I would be very interested.
Cheers,
Nic
For all case subscribers, one pair of PCBs would be made available at cost (i.e. no profit).
(I think less than 10 Euros a piece but we are waiting for quotes.)
For unmatched MPC74, they should be less than 1USD a piece.
Otherwise next to no changes for Option 2 case subscribers.
My recommendation is to use CRC first and upgrade later on, as the test team will need time to come up with conclusive results.
And keep your matched 2SK3497 / 2SJ618 even if you want to use CRC.
We have other uses for them in the F5X project.
Patrick
(I think less than 10 Euros a piece but we are waiting for quotes.)
For unmatched MPC74, they should be less than 1USD a piece.
Otherwise next to no changes for Option 2 case subscribers.
My recommendation is to use CRC first and upgrade later on, as the test team will need time to come up with conclusive results.
And keep your matched 2SK3497 / 2SJ618 even if you want to use CRC.
We have other uses for them in the F5X project.
Patrick
Case subscribers CRC PCBS (tentative) interest list
NicMac__2 cases Option 2
johnwmclean__1 case Option 2
NicMac__2 cases Option 2
johnwmclean__1 case Option 2
Case subscribers CRC PCBS (tentative) interest list
NicMac__2 cases Option 2
johnwmclean__1 case Option 2
pchw__1case Option 2
NicMac__2 cases Option 2
johnwmclean__1 case Option 2
pchw__1case Option 2
Case subscribers CRC PCBS (tentative) interest list
NicMac__2 cases Option 2
johnwmclean__1 case Option 2
pchw__1case Option 2
Nikon1975__1Case Option 2
I'll let you know about Fuku resistors later today.
D.
NicMac__2 cases Option 2
johnwmclean__1 case Option 2
pchw__1case Option 2
Nikon1975__1Case Option 2
I'll let you know about Fuku resistors later today.
D.
Hmm...And keep your matched 2SK3497 / 2SJ618 even if you want to use CRC.
We have other uses for them in the F5X project.

I stop giving you hints upfront till things are done.
Else when I make a misjudgment and have to change direction, some 25 people are following.
And that does not lead to quick and nippy response.
😉
Patrick
Else when I make a misjudgment and have to change direction, some 25 people are following.
And that does not lead to quick and nippy response.
😉
Patrick
- Status
- Not open for further replies.
- Home
- Group Buys
- Potential EUVL F5X designed case user distribution check