Re: PSM LS dedicated buffer (pcb02)
Its green, na und?
😀
Magura said:
Yeah, if it wasn't for the colour
Magura 😉
Its green, na und?
Zen Mod said:
same - I hope it's correct version
😀
Re: Re: PSM LS dedicated buffer (pcb02)
We want fancy colour! And gold plating!!
Magura 🙂
Manu said:
We want fancy colour! And gold plating!!
Magura 🙂
Re: Re: Re: Re: PSM LS dedicated buffer (pcb02)
I like that shade of green better, and the gold plating 😀
Magura 🙂
Zen Mod said:
kwayzee Metaldanske ...........
good enough ?
I like that shade of green better, and the gold plating 😀
Magura 🙂
dimensions
nice work!
whats the dimension of the pcbs?
with tt we can design/purchase a suitable chassis in anticipation. hahaha . . .
nice work!
whats the dimension of the pcbs?
with tt we can design/purchase a suitable chassis in anticipation. hahaha . . .
You guys have done some great adapting. I thought I was finished with the LDR preamp and you take it a big step further. Will you be offering the PC boards?
Re: dimensions etc ....
spavleski will answer you soon , for sure ;
I just have no pcbs or files handy ..........
coincidence ?
😉
just posted ..........
dukekiong said:
spavleski will answer you soon , for sure ;
I just have no pcbs or files handy ..........
Badge said:
coincidence ?
😉
just posted ..........
Trade Post
finally I can give a relief to my inbox , talking about e-mails form greedy DiyAs ("when you'll have these !!?! " ) ........
trade post is here :
http://www.diyaudio.com/forums/showthread.php?postid=1753639#post1753639
finally I can give a relief to my inbox , talking about e-mails form greedy DiyAs ("when you'll have these !!?! " ) ........
trade post is here :
http://www.diyaudio.com/forums/showthread.php?postid=1753639#post1753639
Re: dimensions
PCB01 85 mm X 118 mm
PCB02 88 mm X 174 mm
Zen, please confirm by real measuring...this is taken from PC by measuring right on the screen.😉
Hi theredukekiong said:
PCB01 85 mm X 118 mm
PCB02 88 mm X 174 mm
Zen, please confirm by real measuring...this is taken from PC by measuring right on the screen.😉
TO BEEAMP ........ or not to BEEAMP ?
Guiness just asked interesting question - is it possible to use PSM LS + Buff in B2 manner ........
interesting question - even if I have thoughts about that possibility - I didn't expected that anyone can be interested ........
OK - Lego time .........
if you use PSM in unbalanced mode ( just 2 + 2 LDRs) , you can feed in parallel 2 + 2 buffers ( 2/channel) , introducing fixed attenuator ( two resistors ) between PSM and 2 of them ;
in that manner you'll have unbalanced PSM , with one stereo full throttle buffered out , and one stereo attenuated buffered out .
if you use PSM in balanced mode ( 4+4 LDRs ) and you need two sets of balanced outs , you must use two buffer pcbs ...... having 4+4 buffers ; 4 will be full throttle ( stereo balanced buffered out) and 4 will be fixed attenuated ( stereo balanced attenuated buffered out) .
in each case - you can set desired level of attenuation with any crappy pot between PSM and buffer stage , and later exchange it to set pair of resistors per leg .
I feel like I'm 5 yr young again ....... Lego is funnnnn
Guiness just asked interesting question - is it possible to use PSM LS + Buff in B2 manner ........
interesting question - even if I have thoughts about that possibility - I didn't expected that anyone can be interested ........
OK - Lego time .........
if you use PSM in unbalanced mode ( just 2 + 2 LDRs) , you can feed in parallel 2 + 2 buffers ( 2/channel) , introducing fixed attenuator ( two resistors ) between PSM and 2 of them ;
in that manner you'll have unbalanced PSM , with one stereo full throttle buffered out , and one stereo attenuated buffered out .
if you use PSM in balanced mode ( 4+4 LDRs ) and you need two sets of balanced outs , you must use two buffer pcbs ...... having 4+4 buffers ; 4 will be full throttle ( stereo balanced buffered out) and 4 will be fixed attenuated ( stereo balanced attenuated buffered out) .
in each case - you can set desired level of attenuation with any crappy pot between PSM and buffer stage , and later exchange it to set pair of resistors per leg .
I feel like I'm 5 yr young again ....... Lego is funnnnn
Re: Re: dimensions
😉
too-mo-row ...........
now I can exactly same as you ....... or scrolling in da pcb proggie with cursor ........
naah .... it's too late for any measuring .....
spavleski said:
Hi there
PCB01 85 mm X 118 mm
PCB02 88 mm X 174 mm
Zen, please confirm by real measuring...this is taken from PC by measuring right on the screen.😉
😉
too-mo-row ...........
now I can exactly same as you ....... or scrolling in da pcb proggie with cursor ........
naah .... it's too late for any measuring .....
