Totally off topic, but your comment reminds me of a saying, " Anyone can p*** on the floor, but it takes a real hero to s*** on the ceiling."
And the amp, interesting. brommermartin, any pictures of what it is going to go into? And any schematics?
Could be a problem with EXIF headers; they indicate the orientation of modern JPEG files, but are supported by some programs and not by others. Jhead is a free program you can use to change or remove them.
G-807 40W Power Amplifier
This is the final prototype for a 40w power amplifier.
Fully balanced configuration with Lundahl LL1540 input, 6N1P input, 6N6P driver and G-807 with toroid output transformer.
Power supply separated for input - driver and power stage with inductive filter.
Danilo
This is the final prototype for a 40w power amplifier.
Fully balanced configuration with Lundahl LL1540 input, 6N1P input, 6N6P driver and G-807 with toroid output transformer.
Power supply separated for input - driver and power stage with inductive filter.
Danilo
Attachments
Nice, Azazello. Care to share your schematic for the PSE 6AS7? I'm in the process of working on a PSE 6AS7 and would love to see what you came up with. More importantly, what are your impressions of the PSE 6AS7? It's not an easy design to do well, from what I can tell. And parallel SE output tubes sometimes get a bad rap due to muddy sound and other issues.
Sorry, the amp and it schema are in Bulgaria, I'm in Baltimore USA. I like it sound with deep bass and not aggressive sound. As I remember....OT - 1.5 kohm., auto bias 65 v, plate current about 2 x 45-50 ma. 6J9P in penthode mode with about 10-15 ma.
What a neat clean desk you have!🙂 Wish I could do this with mine😀.
But am I correct in noticing a step attenuator?
If so, can you supply that circuit diagram? Perhaps you
have a separate thread for this design? Could not find it
though.
preamps galore.....from left to right, 4kn8 CCDA, 6SN7/6RHH8 Impasse wamabe, 7N7 version of the Impasse wanabe, and 6AN7 triode pentode line amp.....
two in the middle have balanced outputs...can be used to bridge solid state amps...
two in the middle have balanced outputs...can be used to bridge solid state amps...
An externally hosted image should be here but it was not working when we last tested it.
Nice Tony, do you ever stop building?
As you build so many various amps, do you get your chassis made locally or do you use some generic chassis such as Hammond?
Cheers
Matt
As you build so many various amps, do you get your chassis made locally or do you use some generic chassis such as Hammond?
Cheers
Matt
the chassis are local job. 1.5 to 2.5mm and powder coated too...
i still have lot on my mind to build....most of my builds get bought
eventually, that is how i am able to enjoy my retirement and build build build....
A TDA7294 power amplifier with 12AU7 SRPP front end.
An externally hosted image should be here but it was not working when we last tested it.
Latest project:
JJ 2A3-40 single ended.
Three stages:
Triode- connected 6AU6 input stage
Triode Connected 6005W driver stage.
PSU is simple choke input supply.
Overall styling is 50s Art Deco revival with rose gold chassis, topped with three coats of satin, clear lacquer.
JJ 2A3-40 single ended.
Three stages:
Triode- connected 6AU6 input stage
Triode Connected 6005W driver stage.
PSU is simple choke input supply.
Overall styling is 50s Art Deco revival with rose gold chassis, topped with three coats of satin, clear lacquer.