Phase Linear Model 700

[sixtek]

Nice results!
Thanks Netlist!

What SIM software are you using? I cannot identify it (I'm usig Tina, Multisim (aka EWB) and Simmetrix).

In real life, PL only use two big capacitors, not bypassed.

And it never caused any instabilty at PL-700? 99% of amps have bypass cap on the board.

Maybe it would be a possible upgrade of PL-700 to solder caps on the amp PCB?

 

[Netlist]

Simulator is Microcap.

When you read back in this thread, you will find that some of us are attempting to rebuild this amp. The sim has no other purpose then to get more insight in the possibilities to do so.

/Hugo

 

[Netlist]

-3dB points are between 10Hz and 107kHz:

 

[Netlist]

Here is the circuit file:
Change the extention to .CIR