Looks nice!
I understand its a busy time of year with the holidays upon us, I'm in no hurry to get boards speaking for myself.
Randy
Thanks for the update, you may as well now wait till after the peak Christmas mail rush around the world as they will only get delayed anyway.
Just let us know the eventual date you do air mail them out, thanks again.
Cheers,
Gary.
Just let us know the eventual date you do air mail them out, thanks again.
Cheers,
Gary.
Hi Marcel,
Do you have an update on air mail despatch on these pcb's for those of us who have ordered and paid for them. just like to know so I can write in my diary approximately when to expect them here, thanks.
Kind Regards,
Gary..
Do you have an update on air mail despatch on these pcb's for those of us who have ordered and paid for them. just like to know so I can write in my diary approximately when to expect them here, thanks.
Kind Regards,
Gary..
Randy...Pls send your address
The rest of the PCB's and FETS are sent today!
Happy new year All!!!
The rest of the PCB's and FETS are sent today!
Happy new year All!!!
Marcel,
Happy New Year!
My PCB's just arrived ... thanks. But no partslist come with the boards.
Can send by PM.
Tranks
Happy New Year!
My PCB's just arrived ... thanks. But no partslist come with the boards.
Can send by PM.
Tranks
Can you PM a parts list to me while you're at it?
Would like to get a look at it while my board is making its way over to me.
Thanks
Would like to get a look at it while my board is making its way over to me.
Thanks
Hi guy's
For the schematics and part list pls look at post #10 and #11.
I have not included R1, C1 and C2 on the PCB as they are on the connector and in between the connector and the PCB in my setup.
Also changed R17 and R18 into 2 parallel resistors as I use a reed contact to switch the Iq and dont want to take the risk that this currentpath gets interupted with the result that the Iq is undefined.
Let me know if there are any other questions
Thanks!
For the schematics and part list pls look at post #10 and #11.
I have not included R1, C1 and C2 on the PCB as they are on the connector and in between the connector and the PCB in my setup.
Also changed R17 and R18 into 2 parallel resistors as I use a reed contact to switch the Iq and dont want to take the risk that this currentpath gets interupted with the result that the Iq is undefined.
Let me know if there are any other questions
Thanks!
Does anyone have a Mouser or Digikey BOM for this board?
Would make it much easier.
If not, are all resistors 1/4 w, 1%?
Thanks
Randy
Would make it much easier.
If not, are all resistors 1/4 w, 1%?
Thanks
Randy
FC-A 4,7M 16 Elko radial, 4,7 mF, 16 V, 105°C, low ESR, AEC-Q200 30
BC 556B DIO Bipolartransistor, PNP, 65V, 0,1A, 0,5W, TO-92 500
MKS2-100 1,5µ Folienkondensator, 1,5µF, 100V, RM5 15
ECWFD 4,7U 450 Folienkondensator, 4,7 µF, 450 V, RM 23, 110°C, 5% 15
METALL 160 Widerstand, Metallschicht, 160 Ohm, 0207, 0,6 W, 1% 100
MKP2-100 68N Folienkondensator, 68nF, 100V, RM5 15
FKP2-63 330P Folienkondensator, 330pF, 63V, RM5 30
BC 546B Bipolartransistor, NPN, 65V, 0,1A, 0,5W, TO-92 500
RAD FC 2.200/50 Elko radial, 2,2 mF, 50 V, 105°C, low ESR, AEC-Q200 60
MKP2-250 47N Folienkondensator, 47nF, 250V, RM5 100
METALL 10,0K Widerstand, Metallschicht, 10,0 kOhm, 0207, 0,6 W, 1% 100
METALL 221K Widerstand, Metallschicht, 221 kOhm, 0207, 0,6 W, 1% 100
METALL 100 Widerstand, Metallschicht, 100 Ohm, 0207, 0,6 W, 1% 100
LM 79L12 ACZ Spannungsregler, fest, -12 V, TO-92 10
METALL 3,83K Widerstand, Metallschicht, 3,83 kOhm, 0207, 0,6 W, 1% 100
METALL 2,80K Widerstand, Metallschicht, 2,80 kOhm, 0207, 0,6 W, 1% 100
METALL 604 Widerstand, Metallschicht, 604 Ohm, 0207, 0,6 W, 1% 100
METALL 665 Widerstand, Metallschicht, 665 Ohm, 0207, 0,6 W, 1% 100
METALL 475 Widerstand, Metallschicht, 475 Ohm, 0207, 0,6 W, 1% 100
METALL 402 Widerstand, Metallschicht, 402 Ohm, 0207, 0,6 W, 1% 100
METALL 80,6 Widerstand, Metallschicht, 80,6 Ohm, 0207, 0,6 W, 1% 100
METALL 10,0 Widerstand, Metallschicht, 10,0 Ohm, 0207, 0,6 W, 1% 100
METALL 22,1 Widerstand, Metallschicht, 22,1 Ohm, 0207, 0,6 W, 1% 100
LM 78L12 ACZ Spannungsregler, fest, 12 V, TO-92 15
TL 071 DIP Operationsverstärker, 1-fach, DIP-8 15
METALL 47,5 Widerstand, Metallschicht, 47,5 Ohm, 0207, 0,6 W, 1% 100
METALL 100K Widerstand, Metallschicht, 100 kOhm, 0207, 0,6 W, 1% 100
FKP2-63 150P Folienkondensator, 150pF, 63V, RM5 15
MKS2-100 100N Folienkondensator, 100nF, 100V, RM5 60
BC 556B DIO Bipolartransistor, PNP, 65V, 0,1A, 0,5W, TO-92 500
MKS2-100 1,5µ Folienkondensator, 1,5µF, 100V, RM5 15
ECWFD 4,7U 450 Folienkondensator, 4,7 µF, 450 V, RM 23, 110°C, 5% 15
METALL 160 Widerstand, Metallschicht, 160 Ohm, 0207, 0,6 W, 1% 100
MKP2-100 68N Folienkondensator, 68nF, 100V, RM5 15
FKP2-63 330P Folienkondensator, 330pF, 63V, RM5 30
BC 546B Bipolartransistor, NPN, 65V, 0,1A, 0,5W, TO-92 500
RAD FC 2.200/50 Elko radial, 2,2 mF, 50 V, 105°C, low ESR, AEC-Q200 60
MKP2-250 47N Folienkondensator, 47nF, 250V, RM5 100
METALL 10,0K Widerstand, Metallschicht, 10,0 kOhm, 0207, 0,6 W, 1% 100
METALL 221K Widerstand, Metallschicht, 221 kOhm, 0207, 0,6 W, 1% 100
METALL 100 Widerstand, Metallschicht, 100 Ohm, 0207, 0,6 W, 1% 100
LM 79L12 ACZ Spannungsregler, fest, -12 V, TO-92 10
METALL 3,83K Widerstand, Metallschicht, 3,83 kOhm, 0207, 0,6 W, 1% 100
METALL 2,80K Widerstand, Metallschicht, 2,80 kOhm, 0207, 0,6 W, 1% 100
METALL 604 Widerstand, Metallschicht, 604 Ohm, 0207, 0,6 W, 1% 100
METALL 665 Widerstand, Metallschicht, 665 Ohm, 0207, 0,6 W, 1% 100
METALL 475 Widerstand, Metallschicht, 475 Ohm, 0207, 0,6 W, 1% 100
METALL 402 Widerstand, Metallschicht, 402 Ohm, 0207, 0,6 W, 1% 100
METALL 80,6 Widerstand, Metallschicht, 80,6 Ohm, 0207, 0,6 W, 1% 100
METALL 10,0 Widerstand, Metallschicht, 10,0 Ohm, 0207, 0,6 W, 1% 100
METALL 22,1 Widerstand, Metallschicht, 22,1 Ohm, 0207, 0,6 W, 1% 100
LM 78L12 ACZ Spannungsregler, fest, 12 V, TO-92 15
TL 071 DIP Operationsverstärker, 1-fach, DIP-8 15
METALL 47,5 Widerstand, Metallschicht, 47,5 Ohm, 0207, 0,6 W, 1% 100
METALL 100K Widerstand, Metallschicht, 100 kOhm, 0207, 0,6 W, 1% 100
FKP2-63 150P Folienkondensator, 150pF, 63V, RM5 15
MKS2-100 100N Folienkondensator, 100nF, 100V, RM5 60