PCB for cascoded IXYS CCS (tube)

[UnixMan]

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): don't know yet, I think 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2

BTW: it would be nice to start a GB for parts, too...

 

[Gluca]

BTW: it would be nice to start a GB for parts, too...

hey! you have a preamp PCB fully populated ... start from there ;-)

PS talk to sinuko for parts, glad to help as necessary

 

[guglielmope]

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): don't know yet, I think 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2

Grazie e continua così.
Guglielmo

 

[Gluca]

I got a quotation from the manufacturer. now we are at ~58boards and it will require 3 panels (20 boards per panel) costing 96euro each.

60 boards = 3x96 euro + shipping (+20% VAT if I'll have them shipped to Italy) -> 6.8euro/brd

if we can reach 124 boards we can cut down the costs to 300euro (a single big panel) for 124 boards

124 boards = 300 euro + shipping (+VAT) -> 3.4euro

prices would be a bit cheaper if shipped to USA but I will stay here until the end of July.

C'MOOON .. where are all the buyers that got the IXYS fets from the other GB? I can easily increase my qty if there are enough buyers to reach the price break.

 

[Gluca]

I forgot to mention ... those boards can be used as load over the anode and under the cathode: the two CCS are completely independent

 

[sugarn]

I have ordered 40 pcs. of IXTP01N100D and no DN2540. I'm planning to use CCS 2 pcs. of IXTP01N100D on tube cathode. So I think I can not use this PCB.

 

[bravi]

CCS pcb

Hi Gian,

If it helps to reach 120 boards I will take 12. If interest is low I may have to cut back to 6 boards only.

Cheers!

bravi

 

[Gluca]

Sugarn you can ... I am modifying the PCB so you can use TO92 or TO220 devices for the lower fet. I will post the mod on monday.

Bravi ... let's how many will join.

 

[TonyTecson]

depending on actual price i may take 6,


Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): don't know yet, I think 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6 , gluca, please hold on to my cash balance...thanks

 

[Gluca]

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12

 

[Dagwood]

I'm in for 4 mate

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4

Cheers

 

[10y]

I'm in for 6

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6

Thank you Luca🙂

 

[revintage]

It´s pity you haven´t made room for a cap for using the board as gyrator(AC CCS) to put above a pentode.

 

[Gluca]

Lars ... what cap do you have in mind? room on the board is a getting tight but I am redesigning it quite deeply.

 

[Dr_Strangelove]

6 for me please

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6
dr.strangelove3 (Netherlands): 6

Thanks!

 

[siang]

6 for me please

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6
dr.strangelove3 (Netherlands): 6
siang (Taiwan): 6

Thanks!

 

[Ryssen]

6 for me!

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6
dr.strangelove3 (Netherlands): 6
siang (Taiwan): 6
Ryssen (Sweden):6
Thanks!

 

[sugarn]

Gluca,

If this pcb can work with IXTP01N100D on lower fet, please add 10 pcs. for me.

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6
dr.strangelove3 (Netherlands): 6
siang (Taiwan): 6
Ryssen (Sweden):6
Sugarn (Thailand) : 10

 

[ccliu]

6 for me!

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6
dr.strangelove3 (Netherlands): 6
siang (Taiwan): 6
Ryssen (Sweden):6
Sugarn (Thailand) : 10
ccliu (Taiwan): 6

 

[Gluca]

Hum ... we are pretty close to the 124 pieces price break!!