jazzy said:
Pls. for comment or suggestion!
jazzy
This looks simply great!! And very compact. Can we use TO3P's as well?
JH will love it.
Did you build it?
/Hugo
Sawzall said:My only suggestion is possibly making provision for Ro to be a precision trimmer (1k or so). This is the magic resistor since it can alter so much of the amp - gain, feedback, and frequency slope. I can see my self wanting to play with the value...
Thanks for suggestion - it will be done!
jazzy
http://www.diyaudio.com/forums/showthread.php?postid=129558#post129558tschrama said:Hi,
Maybe I missed something. It seems that this PCB is for a power amp? Is there another hread about a PASS-YAX2-JH schematic?
Regards,
Thijs
/Hugo
Check the whole Size for the T03
It looks to me that the whole size is to small for the standard lead. The leads are about .040" so the whole size should be about .045". If these are plated through, you should consult with the the PCB vendor about the loss in diameter from plating.
James
It looks to me that the whole size is to small for the standard lead. The leads are about .040" so the whole size should be about .045". If these are plated through, you should consult with the the PCB vendor about the loss in diameter from plating.
James
Banned
Joined 2002
joensd said:Which post from the MSSwCF-thread holds exactly that schematic?
Or could you post the schematic here, jazzy?
TIA
Jens
Post #610 from 17. Apr. 2003
jazzy
Thanks for the hint, jazzy.Post #610 from 17. Apr. 2003
jazzy
__________________
J.Z.
Nice layout BTW!
Jens
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- PASS-YAX2-JH pcb.