will the crossover be in the amp case?
Yup. My bedroom system with integrated F5T's inside.
wakoo
for bedroom everything needs to be sensitive , including spks and amp
I can think of at least 3 things need to be Turbo , before amp

for bedroom everything needs to be sensitive , including spks and amp
I can think of at least 3 things need to be Turbo , before amp

Hi,
I am looking for an electronic crossover to do the following:
low pass and high pass on midrange (330Hz and 2Khz)
high pass on tweeter (2Khz)
6db/oct slopes
I will need TWO B4s, correct? Will the sound quality degrade going through two B4's?
Thanks,
Herman
Yes, two would be necessary for this type of crossover. Your probably would want one for the left channel, one for the right.
Nelson or Jon,
I am staring at the B4 internals, working out my version, and i realize i dont see a psu.
I am staring at the B4 internals, working out my version, and i realize i dont see a psu.
PSU
Small switching power supply on the cord.
Nelson or Jon,
I am staring at the B4 internals, working out my version, and i realize i dont see a psu.
Small switching power supply on the cord.
B4's
There is still no information on a new run of B4's. They do not appear to be high on the list of projects.
B5's are still available. This is the version for full range drivers in an open baffle speaker. (can be used with a slot loaded woofer if you like).
There is still no information on a new run of B4's. They do not appear to be high on the list of projects.
B5's are still available. This is the version for full range drivers in an open baffle speaker. (can be used with a slot loaded woofer if you like).
I like being $marta$$

(but I'll not reveal info that Pa is working on tube based xover ........ )

(but I'll not reveal info that Pa is working on tube based xover ........ )
- Home
- Amplifiers
- Pass Labs
- Pass Labs B4 crossover questions