Unfortunate work circumstances force me to sell of some DIY parts. I am selling the whole setup below for $325 shipped Conus. I did a rough estimate and sourcing these parts brand new would put you around $450. Keep in mind I only have the 3 pairs of daughter boards.
Here is everything you get. Keep in mind some parts have been used, some brand new, and the m2x boards untested.
Some of these parts will show wear from storage or use, but I can guarantee the diodes and PSU's work perfectly. I replaced all of these parts with SLB boards which is why I no longer need them.
Here is everything you get. Keep in mind some parts have been used, some brand new, and the m2x boards untested.
- Two Triad VPT36-4440 (2x18VAC 160VA) Transformers (USED)
- Four diode bridges using MBR20200CT (USED)
- Two Power supply boards with 60,000uf per rail and CL-60 installed for GLB (USED)
- Two M2x boards with 6l6's DC offset modifications (NOT TESTED)
- Edcors installed with Copper Strips
- Three Daughterboards - Norwood, Ishikawa, and Cedarburg (BLANK)
- Set of Gold Plated Binding Posts (NEVER USED)
- Unmatched set of IRFP240/IRFP9240 Mosfets (NEVER USED)
- Pair of Gold Plated RCAS (NEVER USED)
- XRK's Daughterboard testing PCB (NEVER USED)
- Mu Metal to cover the Edcor Transformers (to shield the Edcors)
- Spade connectors for the M2x boards and the diode bridges
Some of these parts will show wear from storage or use, but I can guarantee the diodes and PSU's work perfectly. I replaced all of these parts with SLB boards which is why I no longer need them.
Attachments
Last edited:
