I have at least 4 if not more autoformers removed from junked PA power amps. 2 are Crown and 2 are QSC and both were 200wpch so these are pretty hefty toroids.
These were used to convert the standard amp output to a high impedance output for driving 70V or 100V distributed line systems. so these have an 8ohm rated input and a 4ohm/70V/100V output typically. I have no idea what they actual specs are but they would be pretty wide bandwidth typically.
should i scrap these or do they have a use??
These were used to convert the standard amp output to a high impedance output for driving 70V or 100V distributed line systems. so these have an 8ohm rated input and a 4ohm/70V/100V output typically. I have no idea what they actual specs are but they would be pretty wide bandwidth typically.
should i scrap these or do they have a use??
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.