Thanks a lot for the nice boards and the "bonus" Veteran! I received them today in pefect order.
wim said:
Great news 😉
Now I only have few tin plated sets left if somebody is still interested.
last boards
please Veteran if you still have a complete set of P1.7 and psu tell me what do i do....please i am a newbee.
thanks in advance
Marco
please Veteran if you still have a complete set of P1.7 and psu tell me what do i do....please i am a newbee.
thanks in advance
Marco
Matched mosfets
I will send a mail to all who have
requested fets with the payment instructions in the next day's.
The fets have been selected and I will send the mails in the order I have received them.
I have 18 pairs IRF9620, 22 pairs IRF620, 16 pairs IRF610 and a total of 170 IRF240 and 110 IRF9240.
If anyone has spare lowvoltech's and want to trade for matched pairs, I'm very interested.
Cheers...
I will send a mail to all who have
requested fets with the payment instructions in the next day's.
The fets have been selected and I will send the mails in the order I have received them.
I have 18 pairs IRF9620, 22 pairs IRF620, 16 pairs IRF610 and a total of 170 IRF240 and 110 IRF9240.
If anyone has spare lowvoltech's and want to trade for matched pairs, I'm very interested.
Cheers...
PS boards for the ZV9
Hi Vereran,
I would be interested in 4 PS boards for the ZV9 only.
Are you interested to sell?
Hi Vereran,
I would be interested in 4 PS boards for the ZV9 only.
Are you interested to sell?
Hello Veteran,
I received my boards. They are really nice. You did a great job. Thanks for the fast delivery.
Regards,
Zoltan
I received my boards. They are really nice. You did a great job. Thanks for the fast delivery.
Regards,
Zoltan
Re: PS boards for the ZV9
Sorry, but it's not possible. I ordered similar quantity of PS and Zen boards to create sets 😉
Tarasque said:
Sorry, but it's not possible. I ordered similar quantity of PS and Zen boards to create sets 😉
hi, could someone tell me what the minimum wattage on the different resistors and diodes (&zeners) are?
kmj said:
You can use 0.5W - 1.3W Zener diodes. Resistors - 0.6W.
In my preamplifier all resistors (excluding 22R and 33R - they are 0.5W) are 0.25W.
thanks, I wrote a bit too soon and I just found it a bit earlier in the thread.
But anyway, it doesn't hurt to repeat it 🙂
But anyway, it doesn't hurt to repeat it 🙂
Hi Veteran!
I received them, and they are beautifull made, thanks Veteran, a quick delivering! I will make some beauty off it. And keep in touch about the process. Grtz Teake
I received them, and they are beautifull made, thanks Veteran, a quick delivering! I will make some beauty off it. And keep in touch about the process. Grtz Teake
Hi veteran!
I have now ordered all the parts for the Aleph P, and I'm awaiting the various shipments. Hopefully, I may finish the preamp within a few weeks, dependent on the shipments and so on. I'll build it dual mono, exept for the input and volume (also placed just after the input and not after the output as in the original). This is due to the fact that as I don't have a balanced cd or dac there is no need to use a balanced input at the time being. The unbalanced attenuator was cheap and recommended, so I'll try this first. A part from this I'll use BG N for input and output caps and Dale resistors. The other capasitors are standard (any recommendations?). The casing is all ready and waiting. Any recommendations for wiring?
I have now ordered all the parts for the Aleph P, and I'm awaiting the various shipments. Hopefully, I may finish the preamp within a few weeks, dependent on the shipments and so on. I'll build it dual mono, exept for the input and volume (also placed just after the input and not after the output as in the original). This is due to the fact that as I don't have a balanced cd or dac there is no need to use a balanced input at the time being. The unbalanced attenuator was cheap and recommended, so I'll try this first. A part from this I'll use BG N for input and output caps and Dale resistors. The other capasitors are standard (any recommendations?). The casing is all ready and waiting. Any recommendations for wiring?
I'm sorry for all the hopeless questions, but here we go again:
As I have a SE source I was wondering how I should connect the inputboards to ensure that one ground is negative while the other is positive - in order to cancel out the noise? I will use a normal stereo switch.
Thanks!
As I have a SE source I was wondering how I should connect the inputboards to ensure that one ground is negative while the other is positive - in order to cancel out the noise? I will use a normal stereo switch.
Thanks!
Veteran,
I'm too late, but do you still have the boards, I want to order one set dual mono.
Cheers
Farl
I'm too late, but do you still have the boards, I want to order one set dual mono.
Cheers
Farl
- Status
- Not open for further replies.