• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

OLD THREAD DAC End by Andrea Ciuffoli

Status
Not open for further replies.
Jump to Latest
#1,742
My DAC-END

Guys,

I think that this time I did a really good job. Have a look !

D.
 

Attachments

  • IMG_2947.jpg
    IMG_2947.jpg
    159.7 KB · Views: 401
  • IMG_2949.jpg
    IMG_2949.jpg
    247.3 KB · Views: 388
  • IMG_2950.jpg
    IMG_2950.jpg
    199.7 KB · Views: 377
#1,746
I update the Payment for PCB DAC + The price PCB

I update the Payment for PCB DAC
1. pathetic (1 set)
2. cchean ( 2 sets )
3. Lucylu (1 set): Payment
4. Ulyses31 (1 set): Payment
5. damohpi (1 set dac end 2 pcb): Payment
6. mikvous (3 sets)
7. gipione ( 1 set)
8. flocchini (1 6h6P if done, 1 Salas HV): Payment
9. belkoff (full set dac end 2 + 1 6h6P if done, 1 Salas HV) + schematic for each PCB
10. klaju1955 (1 set)
11. ben-jam-in (1 set): Payment
12. morpheous
13. hotzman (2 x full set new dac end 2 pcb)
14. le´flu (one complete set of new DAC-pcb)
15. klie (1 set)
16. Yomanze (1 DAC PCB only): Payment
17. Ferrari (1 full set + 1 extra I/V stage PCB) : Payment
18. Sugden (1 set): Payment
19.Duc tran: 1 set DAC-end +2 IV stage : payment

Please forward payment to me! I would like to thank


1. PCB DAC-End (DAC+Salas shunt for DAC)
Material: FR4 – 1.6mm
Layers: 2
Board size: 118 x 230 mm
Surface finish: Immersion Gold
Soldermask: Both sides – RED
Silkscreen: Legend on top
The price: Board set
The DAC-END up dat : 40$

2. PCBI/V stage ( Salas HV shunt + IV stage)
Material: FR4 – 1.6mm
Layers: 2
Board size: 140 x 230 mm
Surface finish: Immersion Gold
Soldermask: Both sides – RED
Silkscreen: Legend on top
The price: Board set
1. The DAC-END : 40$
2. PCB I/V stage : 40$

Total: 80$ including ( Shipping by surface mail + fre pay pal+ 2 PCB)
 
#1,751
Nikon1975 said:
Salas, as you see I have a thermometer sticked in the heatsink. What is the max temp I can tolerate ? I have to decide if I want to put ventilation also on top. The chassis is open on the sides to allow ventilation.

Thanks,

Davide
Click to expand...

What is the max temp I can tolerate ?
I think it can tolerate about 10-15W! ( it is ok for 9160 and 840)

Nikon1975, that is ok, no need open on the sides to allow ventilation.
Just above or below is good@!
 
#1,753
quanghao said:
I update the Payment for PCB DAC
1. pathetic (1 set)
2. cchean ( 2 sets )
3. Lucylu (1 set): Payment
4. Ulyses31 (1 set): Payment
5. damohpi (1 set dac end 2 pcb): Payment
6. mikvous (3 sets)
7. gipione ( 1 set)
8. flocchini (1 6h6P if done, 1 Salas HV): Payment
9. belkoff (full set dac end 2 + 1 6h6P if done, 1 Salas HV) + schematic for each PCB
10. klaju1955 (1 set)
11. ben-jam-in (1 set): Payment
12. morpheous
13. hotzman (2 x full set new dac end 2 pcb)
14. le´flu (one complete set of new DAC-pcb)
15. klie (1 set)
16. Yomanze (1 DAC PCB only): Payment
17. Ferrari (1 full set + 1 extra I/V stage PCB) : Payment
18. Sugden (1 set): Payment
19.Duc tran: 1 set DAC-end +2 IV stage : payment

Please forward payment to me! I would like to thank


1. PCB DAC-End (DAC+Salas shunt for DAC)
Material: FR4 – 1.6mm
Layers: 2
Board size: 118 x 230 mm
Surface finish: Immersion Gold
Soldermask: Both sides – RED
Silkscreen: Legend on top
The price: Board set
The DAC-END up dat : 40$

2. PCBI/V stage ( Salas HV shunt + IV stage)
Material: FR4 – 1.6mm
Layers: 2
Board size: 140 x 230 mm
Surface finish: Immersion Gold
Soldermask: Both sides – RED
Silkscreen: Legend on top
The price: Board set
1. The DAC-END : 40$
2. PCB I/V stage : 40$

Total: 80$ including ( Shipping by surface mail + fre pay pal+ 2 PCB)
Click to expand...

Hello,

I´m a little bit confused with the PCB´s sets, this payment is now for
the 4 PCB set with E182CC or the 2 PCB set with 6H30.

Klaus
 
#1,755
quanghao said:
I update the Payment for PCB DAC
1. pathetic (1 set)
2. cchean ( 2 sets )
3. Lucylu (1 set): Payment
4. Ulyses31 (1 set): Payment
5. damohpi (1 set dac end 2 pcb): Payment
6. mikvous (3 sets)
7. gipione ( 1 set)
8. flocchini (1 6h6P if done, 1 Salas HV): Payment
9. belkoff (full set dac end 2 + 1 6h6P if done, 1 Salas HV) + schematic for each PCB
10. klaju1955 (1 set)
11. ben-jam-in (1 set): Payment
12. morpheous
13. hotzman (2 x full set new dac end 2 pcb)
14. le´flu (one complete set of new DAC-pcb)
15. klie (1 set)
16. Yomanze (1 DAC PCB only): Payment
17. Ferrari (1 full set + 1 extra I/V stage PCB) : Payment
18. Sugden (1 set): Payment
19.Duc tran: 1 set DAC-end +2 IV stage : payment

Please forward payment to me! I would like to thank


1. PCB DAC-End (DAC+Salas shunt for DAC)
Material: FR4 – 1.6mm
Layers: 2
Board size: 118 x 230 mm
Surface finish: Immersion Gold
Soldermask: Both sides – RED
Silkscreen: Legend on top
The price: Board set
The DAC-END up dat : 40$

2. PCBI/V stage ( Salas HV shunt + IV stage)
Material: FR4 – 1.6mm
Layers: 2
Board size: 140 x 230 mm
Surface finish: Immersion Gold
Soldermask: Both sides – RED
Silkscreen: Legend on top
The price: Board set
1. The DAC-END : 40$
2. PCB I/V stage : 40$

Total: 80$ including ( Shipping by surface mail + fre pay pal+ 2 PCB)
Click to expand...

quanghao

Is it possible to be added to this list or have you closed it? I would like both DAC-END & I/V boards.

Thanks.
 
Status
Not open for further replies.
Top Bottom