Some old Scan Speaks there
scanspeak Tieftöner Bass 21W4208P2ASD Set 1 Paar = 2 Stück alnicoMagnet 21cm | eBay
scanspeak Tieftöner Bass 21W4208P2ASD Set 1 Paar = 2 Stück alnicoMagnet 21cm | eBay
those are 2 lovely sounding drivers. here is another piscure of one i have at home.
sorry for the bad picture. (will try to get a better one later.)
sorry for the bad picture. (will try to get a better one later.)
An externally hosted image should be here but it was not working when we last tested it.
Hi all,
I recently bought pair of ITT D 235 SD. It sounds very clearly but... Speakers are really lack of bass. What about your speakers? I am thinking about renovation of crossovers. I am hoping it could help. Do you think it is good idea to make a new crossovers? Lets say like here SS vintage.
Regard
Michael
I recently bought pair of ITT D 235 SD. It sounds very clearly but... Speakers are really lack of bass. What about your speakers? I am thinking about renovation of crossovers. I am hoping it could help. Do you think it is good idea to make a new crossovers? Lets say like here SS vintage.
Regard
Michael
Anybody who can help me to.
I'd like to get all info availble of these speakers. Itt D250SD equiped with SCAN-SPEAK drivers. I found them at a flee market for 15€ in Belgium. For as far as i now there are 2 more pare of them in Belgium. I learned scanspeak had an exclusive contract with B&O to provide drivers in the 70's. The drivers look verry solid and handmade with a strong rubbery((woofer) tweeter is made of cotton or silk) edge. Especially i'd like to now how old they are(+/-40j I think) and how they are compared with new speakers in sound quality. My opinion they are the best, but what do I now?
My amp. is onley a Yamaha resciever RC-V560RDS(1990) 75watts and 20Hz-20kHz output.
Room: not verry well accoustically.
Friendly regarts.
I'd like to get all info availble of these speakers. Itt D250SD equiped with SCAN-SPEAK drivers. I found them at a flee market for 15€ in Belgium. For as far as i now there are 2 more pare of them in Belgium. I learned scanspeak had an exclusive contract with B&O to provide drivers in the 70's. The drivers look verry solid and handmade with a strong rubbery((woofer) tweeter is made of cotton or silk) edge. Especially i'd like to now how old they are(+/-40j I think) and how they are compared with new speakers in sound quality. My opinion they are the best, but what do I now?
My amp. is onley a Yamaha resciever RC-V560RDS(1990) 75watts and 20Hz-20kHz output.
Room: not verry well accoustically.
Friendly regarts.
Pic's ITT D250SD
I don't now a thing about T/S mesurements, wikipedia will teach me
The drivers are a D3804 and a 21W-D3808. Can't see ...µF of elco.
Anyway I don't feel like re-cap yet, so far they sound nice enough to me.
However I dit regleu them afther picture show this time and that really make's a difference in the lower sound. They must be air tight.
About the low/bass sound, there's a picture of my livingroom. Where the X is U really get a strong bass sound. Not where U want it but breathtaking, massive.
Beware your neigbours.
Bert.
I don't now a thing about T/S mesurements, wikipedia will teach me
The drivers are a D3804 and a 21W-D3808. Can't see ...µF of elco.
Anyway I don't feel like re-cap yet, so far they sound nice enough to me.
However I dit regleu them afther picture show this time and that really make's a difference in the lower sound. They must be air tight.
About the low/bass sound, there's a picture of my livingroom. Where the X is U really get a strong bass sound. Not where U want it but breathtaking, massive.
Beware your neigbours.
Bert.
Attachments
-
2013-08-27 14.29.45.jpg222.1 KB · Views: 402
-
2013-10-25 18.46.54.jpg30.3 KB · Views: 325
-
2013-10-24 20.32.07.jpg195.2 KB · Views: 268
-
2013-10-24 20.29.18.jpg455.7 KB · Views: 288
-
2013-10-23 18.02.53.jpg35.9 KB · Views: 255
-
2013-10-23 18.02.32.jpg38.3 KB · Views: 226
-
2013-10-23 17.58.40.jpg218.5 KB · Views: 312
-
2013-08-27 14.35.29.jpg657.6 KB · Views: 422
-
2013-08-27 14.34.08.jpg40.8 KB · Views: 393
-
2013-08-27 14.30.35.jpg222.3 KB · Views: 378
Here are WT2 T/S parameter tests on the vintage Dynaco A-25 SS woofer p/n noted in post #40. Also, a pic of the speakers with it's very early above-the-tweeter variovent slot placement.
Attachments
Hi Guys. I have bought ITT 235SD with d3804 mid/tweet.
Cabinets were upgraded with new speaker plugs, new capacitors, and resistors.
With my EL84 almp they sound very nice.
I stumped upon an idea somewhere on diya to remove the front metal, mesh type, grille that sits on the tweeter.
Some say it will open the sound a bit, help imagining and stuff like that.
On the other hand, some say that this metal mesh refracts the sound making it less directional but more widespread.
Metal grille is glued hard so taking it off is cumbersome task.
Please share opinions on that matter.
Cheers.
Cabinets were upgraded with new speaker plugs, new capacitors, and resistors.
With my EL84 almp they sound very nice.
I stumped upon an idea somewhere on diya to remove the front metal, mesh type, grille that sits on the tweeter.
Some say it will open the sound a bit, help imagining and stuff like that.
On the other hand, some say that this metal mesh refracts the sound making it less directional but more widespread.
Metal grille is glued hard so taking it off is cumbersome task.
Please share opinions on that matter.
Cheers.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- Old Scan Speak drivers?