NP F1 Clone Boards

[suds]

Mods ! Request you to change this topic to -

GB NP F1 Clone Boards

 

[milezone]

Hey Suds,

I'm new to this forum and am not really sure what the proper procedure is for acquiring a set of these boards though I would like to. Are these still available? If so how can I go about ordering them? Thank you.

 

[suds]

Yes ! Board are there..

just mail me, sudhirmt@gmail.com will send you details,

 

[audiojoy]

HI Please let me know when F3 boards are available for purchase

 

[suds]

F3 and F5 would be ready next week !
will keep posted here.

 

[audiojoy]

ok great will look out for it

 

[suds]

First Watt F1 , changed Board layout.

Made layout changes, changed resistor size..

 

[tgrauss]

Hello,

why did you change the resistors sizes and layout? Is there something I have to take into account with the old design boards I have received recently?

Thanks

 

[suds]

Some wanted more space for bigger 5watts resistors
as per feed back / requirement I changed it..

Nothing to worry about, I only increased size , so one can use resistor of their choice. 🙂

 

[suds]

Layouts for F1 , F3 and F5, DIY Clones

They are in pdf format (For better resolution) , Rotate page clockwise for viewing.

http://www.4shared.com/file/109435333/d8b8554/AMP-FW-F3-SA.html
http://www.4shared.com/file/109435407/2484040b/FW-F1-AMP-SA.html
http://www.4shared.com/file/109435411/d4fc907f/FirstWatt-F5-SA.html


There would be two Types of these boards.

TYPE1: Lead Pb - Priced : $25 per set, plus shipping

FR-4 1.5mm Board, with 70micron copper, PTH Lead with solder mask, top silk.


TYPE2 : Lead Free : (Price will depend on Qty) mail for details.

FR-4 2mm Board, with 70micron copper PTH Lead Free, Silver plated, with solder mask, top silk

 

[Renron]

Suds,
Is the mosfet layout verticle or horizontal like PaPa's F5?

Have you built a prototype F5 with your boards yet?

Do you have photos of completed PS on your boards?

I like the design of the longer boards you offer, they would seem to be better at heat distribution than some of the other boards on DIYaudio.

Certainly no offense to PD or Cev.


thanks,
Ron
I'm just a solder monkey with glasses

 

[suds]

Hi,

Boards will be ready soon, in production, then will test them once PCB are out..

 

[suds]

I have Clearance from Nelson Pass :

Hi

I have Clearance from Nelson Pass :

Per set of F1 Clone PCB cost is now $19 per set

(F3 and F5 $25 Per set)


PCB Layout here..

http://www.4shared.com/file/1094353...P-FW-F3-SA.html
http://www.4shared.com/file/1094354...Watt-F5-SA.html
http://www.4shared.com/file/1105462...SU_Boards2.html
http://www.4shared.com/file/1094354...-F1-AMP-SA.html

 

[MrMajestic]

Re: I have Clearance from Nelson Pass :

Hi

I have Clearance from Nelson Pass :

Per set of F1 Clone PCB cost is now $19 per set

(F3 and F5 $25 Per set)


PCB Layout here..

http://www.4shared.com/file/1094353...P-FW-F3-SA.html
http://www.4shared.com/file/1094354...Watt-F5-SA.html
http://www.4shared.com/file/1105462...SU_Boards2.html
http://www.4shared.com/file/1094354...-F1-AMP-SA.html

Links don't work.

 

[suds]

there is .. in link !

here is complete link see attached file..

 

[InSides]

Let's see... this "set" includes 2 x amp boards [for stereo] AND 1 x PSU board, is this correct?

The set of 3 PCB's for $24?

 

[suds]

this "set" includes 2 x amp boards [for stereo] AND 1 x PSU board, is this correct? The set of 3 PCB's for $24?

yes correct, 3 PCB's of F1 Clone , but price is reduced to $20 Per Set for F1 Clone. Shipping extra.



F1 Clone Per Set , at $20 (2xAmps, 1 PSU)
Shipping extra.

 

[InSides]

suds,

it seems my emails [sent through the Forum] are not going through.

Can you email me to insides [at] t-home.mk?

Thanks.

 

[suds]

t seems my emails [sent through the Forum] are not going through. Can you email me to insides [at] t-home.mk?

Tried Mailing you.. Mails are bouncing !! can you create mail id in, gmail, yahoo, hotmail kind of sites ? or use your ISP e-mail.

 

[jtktam]

Can you use some other host for the pdf files?

or you can email them to me?

-joe