Do the kits come assembled and with any op amps included? It all that is required is chassis, transformer and connectors? I purchased your previous dac kit, fully assembled and I am still using it.
Hi Thomas,
If the DAC is : RCA/XLR, Full Balanced, USB, BNC, TTL, I2S optical.
Count me in for 1 unit !
Please specify the PCB included in the basic version and options too.
If the DAC is : RCA/XLR, Full Balanced, USB, BNC, TTL, I2S optical.
Count me in for 1 unit !
Please specify the PCB included in the basic version and options too.
hi all,
sorry this several date was funish a urgent file. this dac was funish & test already.
simple kit only had SE ( RCA ) input. if U like to use XLR ( real XLR) seperapre with two relay( all were NEC made in japan, not china). OP, TTL etc. U only need to added the source selection PCB with Panel selection Board into it will OK. Pls check, U will see L & R channel XLR was seperated.
take a look. for it. for further detail I wil answer to U this saturday, sorry I need to funish my file before saturday morning for presentation!
this is source selection PCB w/panel selection.
thx
thomas
sorry this several date was funish a urgent file. this dac was funish & test already.
simple kit only had SE ( RCA ) input. if U like to use XLR ( real XLR) seperapre with two relay( all were NEC made in japan, not china). OP, TTL etc. U only need to added the source selection PCB with Panel selection Board into it will OK. Pls check, U will see L & R channel XLR was seperated.
take a look. for it. for further detail I wil answer to U this saturday, sorry I need to funish my file before saturday morning for presentation!
this is source selection PCB w/panel selection.
thx
thomas
An externally hosted image should be here but it was not working when we last tested it.
hi all,
this is panel selection PCB, use with source selection board
thx
thomas
this is panel selection PCB, use with source selection board
thx
thomas
An externally hosted image should be here but it was not working when we last tested it.
on right hand side corner top small full SMD PCb was USB input. U can considerate order with this source input PCB or not. chips was PCM 2906.
thx
thomas
thx
thomas
An externally hosted image should be here but it was not working when we last tested it.
DAC
Did you get my e-mail about buying one of your DAC's?
Can you please e-mail me info on how to pay for it.
Thanks,
Donovan
Did you get my e-mail about buying one of your DAC's?
Can you please e-mail me info on how to pay for it.
Thanks,
Donovan
I wait fot a reply too. I have been sending Thomas emails for the last 3 days with no reply at all.
Hello,
I am interested in buying the necessary boards and components for the XLR balanced version. Please send me an email with price when you get a chance, I cannot send emails yet... too few posts.
I am interested in buying the necessary boards and components for the XLR balanced version. Please send me an email with price when you get a chance, I cannot send emails yet... too few posts.
hi,
pls check email pls.
for the DAC.
One set DAC set up as photos shown, ( with two set of IV+Buffer) Full assemble & funish, test!
USD 165( include postage ).
One set of source selection board + Panel selection board.
USD45
USB input USD 18.
Match pair AD797 or OP42 ( USD 20), Original follow with DAC was Philips 5534.
Pls considerate added USD 5 for use reg.mail with tracking no to tracy where was the parcel. NIL addition charge for the DAC.
I will declare this was a used small kit! hope U can save some money in tax!
Pls let me know after pay.
AFter money arrived parcel will post within two days.
Parcel receipt I will take photos & post in forum for easy search!
Paypal email aasiu@netvigator.com
photos show simple set of 1 ( full assemble & test )
thx
thomas
pls check email pls.
for the DAC.
One set DAC set up as photos shown, ( with two set of IV+Buffer) Full assemble & funish, test!
USD 165( include postage ).
One set of source selection board + Panel selection board.
USD45
USB input USD 18.
Match pair AD797 or OP42 ( USD 20), Original follow with DAC was Philips 5534.
Pls considerate added USD 5 for use reg.mail with tracking no to tracy where was the parcel. NIL addition charge for the DAC.
I will declare this was a used small kit! hope U can save some money in tax!
Pls let me know after pay.
AFter money arrived parcel will post within two days.
Parcel receipt I will take photos & post in forum for easy search!
Paypal email aasiu@netvigator.com
photos show simple set of 1 ( full assemble & test )
thx
thomas
An externally hosted image should be here but it was not working when we last tested it.
photo show simple set of 2
anotyer IV+ buffer, because this dac IV + buffer can use two or four op-amp!
thx
thomas
anotyer IV+ buffer, because this dac IV + buffer can use two or four op-amp!
thx
thomas
An externally hosted image should be here but it was not working when we last tested it.
Source selection board + Panel selection.
one set was USD 45.
use nano amorphous pulse treansformers & Japan Made NEC parallel relay.
right upper corner was USB receiver w/PCM2906.
thx
thomas
one set was USD 45.
use nano amorphous pulse treansformers & Japan Made NEC parallel relay.
right upper corner was USB receiver w/PCM2906.
thx
thomas
An externally hosted image should be here but it was not working when we last tested it.
Panel selection Board use buttom push for selection.
thx
thomas
thx
thomas
An externally hosted image should be here but it was not working when we last tested it.
Hi Thomas,
I'm interested with the dac + Source selection board + Panel selection and usb input.. please email me : xxaudioxx(at)gmail.com
tnx
I'm interested with the dac + Source selection board + Panel selection and usb input.. please email me : xxaudioxx(at)gmail.com
tnx
hi lan,
sure, happy to receive your message.
I still in office. I will return email tou tonight!
more question pls email to me!
I forgot to say if any buyer like to use tube buffer, I can prepare full parts to them.
I had many 1959's 5687 tube on hand & will follow with the set.
not need increase postage, only collect back parts, tube sockets & tube charge!
Resistors was Dale, output caps had two tubes, one was Aluminium foil , since output caps was 0.47 uf per channel.
I prefer use 3X0.15uf-0.45uf. Then U can choose 0.15,0.3or 0.45uf for output caps value for tunning the sound!
BTW, Belden digital cable will follow with kits too! ( 0.5M free to U) U will love it!
thx
thomas
sure, happy to receive your message.
I still in office. I will return email tou tonight!
more question pls email to me!
I forgot to say if any buyer like to use tube buffer, I can prepare full parts to them.
I had many 1959's 5687 tube on hand & will follow with the set.
not need increase postage, only collect back parts, tube sockets & tube charge!
Resistors was Dale, output caps had two tubes, one was Aluminium foil , since output caps was 0.47 uf per channel.
I prefer use 3X0.15uf-0.45uf. Then U can choose 0.15,0.3or 0.45uf for output caps value for tunning the sound!
BTW, Belden digital cable will follow with kits too! ( 0.5M free to U) U will love it!
thx
thomas
An externally hosted image should be here but it was not working when we last tested it.
- Status
- Not open for further replies.