Result
Hi All,
Here is the result of my initial projection.
Yes its not a gr8 one.
Courtesy:
My Mobile Camera and the OHP singlet lens.
Guys, please please please let me know if some one can help me in getting the triplet lens.
As you all see the image is not very sharp with the lens I have.
I am getting pissed with the lens I have, and not getting the triplet.
Amit
Hi All,
Here is the result of my initial projection.
Yes its not a gr8 one.
Courtesy:
My Mobile Camera and the OHP singlet lens.
Guys, please please please let me know if some one can help me in getting the triplet lens.
As you all see the image is not very sharp with the lens I have.
I am getting pissed with the lens I have, and not getting the triplet.
Amit
Attachments
no news from me. the repairing guy said he is unable to get the IC so i will have to wait to get back the LCD. my ICU has also become a lot busier, so difficult to find time.
saw your snaps. i think they will look much better with proper screen. and i know how the mobile cam can worsen the actual picure quality.
saw your snaps. i think they will look much better with proper screen. and i know how the mobile cam can worsen the actual picure quality.
there is a bright line of light in your pic, just below the frame. i had similar problem. thats due to gap between wooden frame and LCD frame. you can put a piece of folded paper in that gap and brightness should improve slightly
any one from delhi wana join me to make new projector
hi i m from delhi, i recently joined this forum and found very intresting information. I love to make own projector, so anyone from delhi wana join me can mail me vikas.manav@fluor.com. Well i read lot of stuff about projector and now i feel little confident to start it, and in this forum lots of people are there to help.
vikas
hi i m from delhi, i recently joined this forum and found very intresting information. I love to make own projector, so anyone from delhi wana join me can mail me vikas.manav@fluor.com. Well i read lot of stuff about projector and now i feel little confident to start it, and in this forum lots of people are there to help.
vikas
new triplet supplier in rurkee
Hi friends, those who are unable to get triplet lens from pune and living near or in delhi can get the same at the given below address.
they provide all kind of lenses. May be it will encourage lots of people to join this form and able to make their own Projector.
But i must add that before order just talk to them on phone. they are good in replying not like lensnel.
enjoy and take care
vikas
today i place a bid on ebay for Portable dvd for car in just Rs 1450+Deliver charges ( i wish i win that)
Contact Us Or Send Online Query
Universal Optics
Contact Person : Mr. Mukul Garg
Address : D 1, Industrial Estate,Roorkee -247 667, Uttranchal, INDIA
Tel : +(91)-(1332)-262735/262070
Fax : +(91)-(1332)-262735
E-mail : uniopt@hotmail.com
Visit our Website: http://www.universal-optics.com
Hi friends, those who are unable to get triplet lens from pune and living near or in delhi can get the same at the given below address.
they provide all kind of lenses. May be it will encourage lots of people to join this form and able to make their own Projector.
But i must add that before order just talk to them on phone. they are good in replying not like lensnel.
enjoy and take care
vikas
today i place a bid on ebay for Portable dvd for car in just Rs 1450+Deliver charges ( i wish i win that)
Contact Us Or Send Online Query
Universal Optics
Contact Person : Mr. Mukul Garg
Address : D 1, Industrial Estate,Roorkee -247 667, Uttranchal, INDIA
Tel : +(91)-(1332)-262735/262070
Fax : +(91)-(1332)-262735
E-mail : uniopt@hotmail.com
Visit our Website: http://www.universal-optics.com
Please tell me any ghaziabad or delhi address i can buy the uv filter from or any other information
Tanks in advance.
umeshkumar
umeshkumar09@rediffmail.com
Tanks in advance.
umeshkumar
umeshkumar09@rediffmail.com
My projector results
Hi All here is my projector and the results i got from it.
specs:
10 inch lcd from Nishica model NM-1080
nishica website
250W osram metal halide and ballast
lensel lenses
reflector from a commercial projector
Attaching a couple of photos.Pardon me for the quality of photo it is taken with my mobile.
Hi All here is my projector and the results i got from it.
specs:
10 inch lcd from Nishica model NM-1080
nishica website
250W osram metal halide and ballast
lensel lenses
reflector from a commercial projector
Attaching a couple of photos.Pardon me for the quality of photo it is taken with my mobile.
Attachments
congrats!
Hi Gitesh,
Great job !!!
So finally u got done with your projector, was waiting to see your results . After Atrisarkar complained about screen door probs with the 7" i decided to hold on before i got building mine...
Now, i can compare the results between the 7 inch and 10 inch screens, thanks for the snaps they look fantastic even though its taken by a mobile, i assume the projected image is much more better than these photographs 😀
Looking forward to more photos, keep em coming
Congrats and hope u have a great time watching the bigscreen 😉
Nirmal
Hi Gitesh,
Great job !!!
So finally u got done with your projector, was waiting to see your results . After Atrisarkar complained about screen door probs with the 7" i decided to hold on before i got building mine...
Now, i can compare the results between the 7 inch and 10 inch screens, thanks for the snaps they look fantastic even though its taken by a mobile, i assume the projected image is much more better than these photographs 😀
Looking forward to more photos, keep em coming
Congrats and hope u have a great time watching the bigscreen 😉
Nirmal
projected image
Ya projected image is awesome.10inch really brings down the screen door.
All my friends who have seen it told it is as good a a commercial projector.Some people who saw it were stunned to the core. They did not expect a home made projector give this result. Shalll post some 7.2 megapixel images soon.I may think of getting an even higher resolution display imported some time in the future. Week end 3 shows running 😀
Ya projected image is awesome.10inch really brings down the screen door.
All my friends who have seen it told it is as good a a commercial projector.Some people who saw it were stunned to the core. They did not expect a home made projector give this result. Shalll post some 7.2 megapixel images soon.I may think of getting an even higher resolution display imported some time in the future. Week end 3 shows running 😀Thanks to all
My sincere thanks to all who had contributed to this forum.With out this thread I would not have build my projector. Keep posting your results and all techinical details, it will help the new comers.
My sincere thanks to all who had contributed to this forum.With out this thread I would not have build my projector. Keep posting your results and all techinical details, it will help the new comers.
Congrats fibbrilator, on your successful project.
Did you have any ffc problems in the Nishica lcd? I mean, did you have to use a ffc extention cable?
Pollok
Did you have any ffc problems in the Nishica lcd? I mean, did you have to use a ffc extention cable?
Pollok
Antiglare Removed
Hi Fibrilator, Had you removed the anti glare coating or using the LCD as such with ag film on? I want to know the effects of ag and removal methods in smaller panels.
Congrats for a good projector.
Hi Fibrilator, Had you removed the anti glare coating or using the LCD as such with ag film on? I want to know the effects of ag and removal methods in smaller panels.
Congrats for a good projector.
What is the price of 10 inch lcd from Nishica model NM-1080
Hi Fibbrilator, What is the price of the 10 inch lcd from Nishica model NM-1080 lcd. Did you purchase online? I think www.nishicaindia.com does not accept orders online. How you purchased? How long it took for delivery? Please answer me. I had finished the box and done my projector with 15" Acer 1516 monitor without removing the antiglare. I've tried water soak for more than 14 hrs and the ag don't peel off. So I left it as such. After splitting the fresnel the brighness increased significantly.
So I've decided to finalise my testing and make adjustments for the panel in the mdf with my carpentor. At that time unknowingly the panels ffc got damaged inside. I see only many horizontal black lines and the monitor doesn't seem to work now.
I got terribly worried for about two days. Because my projection was about 95" width with good brightness. DVD playback was also good. But at last I've spoiled the lcd even though I had handled the lcd with due care. So I want to replace the acer monitor panel with the 10" lcd panel if it is SVGA 800x600 compliant which is more than enough for video playback/ home theatre use.
Thanks
Hi Fibbrilator, What is the price of the 10 inch lcd from Nishica model NM-1080 lcd. Did you purchase online? I think www.nishicaindia.com does not accept orders online. How you purchased? How long it took for delivery? Please answer me. I had finished the box and done my projector with 15" Acer 1516 monitor without removing the antiglare. I've tried water soak for more than 14 hrs and the ag don't peel off. So I left it as such. After splitting the fresnel the brighness increased significantly.
So I've decided to finalise my testing and make adjustments for the panel in the mdf with my carpentor. At that time unknowingly the panels ffc got damaged inside. I see only many horizontal black lines and the monitor doesn't seem to work now.
I got terribly worried for about two days. Because my projection was about 95" width with good brightness. DVD playback was also good. But at last I've spoiled the lcd even though I had handled the lcd with due care. So I want to replace the acer monitor panel with the 10" lcd panel if it is SVGA 800x600 compliant which is more than enough for video playback/ home theatre use.
Thanks
- Status
- Not open for further replies.