need advice - 2 way

Status
Not open for further replies.
Jump to Latest
I

ivan-UTN-ARG

Member
Joined 2007
#1
hi everybody, i'm new and i don't know much about desing, and i need an advice.

i've found 2 midwoofers and some tweeters ( 2 philips AD161-T8 and 2 Leea HFD-40 ), and i want to built a 2 way speaker

the woofers are similar to the Dayton DC160-8

Impedance: 8 ohms
VC diam: 2"
Fs: 38 Hz
SPL: 87 dB 1W/1m
Vas: .95 cu. ft.
Qms: 2.8
Qes: .36
Qts: .41
Xmax: 2.5 mm

i haven't problems with the desing of the crossovers, but my problem is the cabinet desing

wich cabinet you recomend for this speaker?, i'm looking for something with good bass from 50hz, and the size of the cabinet is not a problem.

i will use them with a gainclone

sorry for my bad english, hope you understand me
 
#2
sorry, the vc diameter is 1 3/8"

A friend send me this project, it's a bass reflex cabinet, 71 x 18 x 30 cm, about 38 (L), tuning frec: 40Hz port: 3" diam, 6" long.

is this ok?
 

Attachments

  • dibujo.jpg
    dibujo.jpg
    12.4 KB · Views: 209
#3
hi

i'm not ok with that box.


box volume=26.1 liters
fb=37.5 hz
vent diameter=5.08 cm
vent length=12.72 cm
vent area=20.27

or box volume= 20 liters
fb=41.83 hz
vent diameter=5.08 cm
vent length=13.58 cm
peak 1.47 db at 70 hz

regards
😉
 
#6
ivan-UTN-ARG said:
ok i will try that box.

i have some problems with win isd, i can't create a speaker profile

thanks for the replies
Click to expand...


Take your time...

(Hi Thawach, I have been looking at your great work around here to, thanks. Nice to have you around. Are you close to were the Ushers are made? eheh, no I meant Taiwan. A late good Welcome...)
 
Status
Not open for further replies.
Top Bottom