• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Mounting semiconductors : mylar insulators

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
gmonno

gmonno

Member
Joined 2004
I'm building a Tubelab SE.
I'm reading the manual and reviewing the parts I ordered from Digikey (thanks George).

The thing is that it says to mount a mylar insulator between the heatsink and the semiconductor, but Digikey did not send me these insulators.

Should I have buyed them (there wasn't a key in parts list) or should they have come with the semiconductors?

Now where can I find them o replace with what?

Thanks for the help

gmonno
 
JonSnell Electronic

JonSnell Electronic

Member
Joined 2012
jonsnell.co.uk
gmonno said:
I'm building a Tubelab SE.
I'm reading the manual and reviewing the parts I ordered from Digikey (thanks George).

The thing is that it says to mount a mylar insulator between the heatsink and the semiconductor, but Digikey did not send me these insulators.

Should I have buyed them (there wasn't a key in parts list) or should they have come with the semiconductors?

Now where can I find them o replace with what?

Thanks for the help

gmonno
Click to expand...

Sorry, not thinking, didn't correct the quotation from the questioner. Either use mica with heat-sink compound or silicone and no compound.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom