Heya,
I want to build a new armboard for my Thorens TD 160 MK II. Have the stock arm armboard, but I don't think the mounting location is ideal for the AS 212.
I have looked around on the internet, but haven't been able to find
how to recalculate the best location to mount the arm. Was wondering
if anyone could point me in the right direction.
best regards,
Jonatan
I want to build a new armboard for my Thorens TD 160 MK II. Have the stock arm armboard, but I don't think the mounting location is ideal for the AS 212.
I have looked around on the internet, but haven't been able to find
how to recalculate the best location to mount the arm. Was wondering
if anyone could point me in the right direction.
best regards,
Jonatan
Hi Jonatan,
I think you will find all of the information you need on the AS-212 on Vinyl Engine | The Home of the Turntable - you do need to join first. Great arm by the way..
I think you will find all of the information you need on the AS-212 on Vinyl Engine | The Home of the Turntable - you do need to join first. Great arm by the way..
Newbie Question - NEED HELP. Sorry for off topic - if your looking for a lenco Turntable what do you do about the voltage being 50hz instead of the 60 hz needed in u.s.??? - thanks need is desperate !
You might look out for a 60Hz motor on ebay, or better yet join up at Lenco Heaven where another forum member may even have one laying around you could purchase.
(Sorry for the thread jack Jonatan.)
Newbie Question - NEED HELP. Sorry for off topic - if your looking for a lenco Turntable what do you do about the voltage being 50hz instead of the 60 hz needed in u.s.??? - thanks need is desperate !
Buying one originally built for the US and Canadian market would be cheapest and easiest.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Source & Line
- Analogue Source
- Mounting Ortofon AS 212 on Thorens TD 160 MK II