i'm kind of at my examination period, so i just leave the job for later X.x
I have the basic 'picture' of what possible faulty problem, but what is the possible cause of white noise (static) by audio speaker ?
I have the basic 'picture' of what possible faulty problem, but what is the possible cause of white noise (static) by audio speaker ?
Silicone * based de-oxydizer and a tooth pick can do miracles...inside the jack plugs !!!
*But not 'oily'
*But not 'oily'
Naahh!! Not to get too pedantic -did I suggested to put RCA cinchs/plugs ?-
To make sound coming out from a computer is an art ,
and we are thinking on closed compartments or 'black boxes' as we expect those to function well.
What you describe could be anything ,from computer PSU to bad shielding ,or also oxydization of some contacts .
To make sound coming out from a computer is an art ,
and we are thinking on closed compartments or 'black boxes' as we expect those to function well.
What you describe could be anything ,from computer PSU to bad shielding ,or also oxydization of some contacts .
hm...... thats quite alot to inspect, any idea how to narrow it down (the area of inspection) or any guidance how to trace out the problem ?
Sorry ,I pick 25 $ only for answering ! 😛
Items carefully packed will be accepted from Mon to Fry 😀
The costumer will be addressed double rate if the circuitry is being modded 😱
Items carefully packed will be accepted from Mon to Fry 😀
The costumer will be addressed double rate if the circuitry is being modded 😱
u want to use it as a boombox.
Pull out + terminal of C113 and C223 and connect this to the RCA sockets u r going to install. Just find the tape power switch. Will normally be a leaf switch on the tape mechanism. Wire this to an externally accessible switch, if u want one or simply short it. Cut the wires to the motor so that it does not draw power and rotate.
select tape and start your boombox.
Gajanan Phadte
Pull out + terminal of C113 and C223 and connect this to the RCA sockets u r going to install. Just find the tape power switch. Will normally be a leaf switch on the tape mechanism. Wire this to an externally accessible switch, if u want one or simply short it. Cut the wires to the motor so that it does not draw power and rotate.
select tape and start your boombox.
Gajanan Phadte
- Status
- Not open for further replies.