• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Mini Speaker Boxes + Vifa D26NC-15 Tweeters

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
H

hweb

Member
Joined 2011
Small (about 4" x 8" x 6"deep) boxes made for M&K (one pair). Clearly these were CNC made. There is routing for a Vifa D26NC tweeter and a Peerless TC9 or TG9 3.5" driver. Both sides and back have another set of holes for an unknown passive radiator. Could make for a rather nice mini-speaker. I was going to seal up the boxes with 1/4" pannel and mount a small class D stereo amp inside and go active. But yet another project that never happened...

I want to include the D26 tweeters with the boxes as they are made for each other. Both boxes and tweeters are new, but a wee bit dusty from storage.

$50 for the lot plus shipping (from 02067)
 

Attachments

  • P1050156 copy.jpg
    P1050156 copy.jpg
    985 KB · Views: 123
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom