microTower bipolar ML-TL for CHR-70 or EL70

[toobhed]

Also, won't be doing removable bottom and if more stuffing is needed I'll remove front driver....

 

[GM]

Hmm, if the frames are as fragile as the older models, then highly recommend mounting them to small sub/supra-baffles, which does double duty stiffening the baffle around the driver.

GM

 

[toobhed]

Will consider that, thanks GM, but for now Ive gone with .75” bb ply. After routing for flush fit there is still .5” behind the driver.

 

[planet10]

Hmm, if the frames are as fragile as the older models, then highly recommend mounting them to small sub/supra-baffles, which does double duty stiffening the baffle around the driver.

As long as you do not overtighten the mounting screws the baskets are not that fragile.

dave

 

[planet10]

...much sooner on a different thread will be pics of the simple A12bw/A7p two-way...

Link?

dave

 

[toobhed]

will provide link when I finalize build and take photos. I do believe "simple two way A12bw + A7p" resides on the "Planet 10" section of diyaudio. But there is a similar thread in "Full Range" that features the same drivers in a two way but build with side vents.