twitchie (4) boards - Canada
spind (4) boards - Canada
Russellc (4) boards -USA
batty (4) boards - Australia
TungstenAudio (4) boards - USA
zman01 (2) - USA
dBel84 (2) boards - USA
BigE (4) TH boards -Canada
wcwc (2) boards - USA
BRN (2) boards - USA
jwjarch (4) boards - USA
poseidonsvoice (2) boards - USA
tomservo (4) boards - USA
mordikai (4) boards- USA
asanden (4) boards - NL
Vunce (4) boards - USA
vvs07 (4) boards - USA
BEYoung (4) boards - USA
Roundtoit (4) boards - USA
TboneAK (4) boards - USA
spind (4) boards - Canada
Russellc (4) boards -USA
batty (4) boards - Australia
TungstenAudio (4) boards - USA
zman01 (2) - USA
dBel84 (2) boards - USA
BigE (4) TH boards -Canada
wcwc (2) boards - USA
BRN (2) boards - USA
jwjarch (4) boards - USA
poseidonsvoice (2) boards - USA
tomservo (4) boards - USA
mordikai (4) boards- USA
asanden (4) boards - NL
Vunce (4) boards - USA
vvs07 (4) boards - USA
BEYoung (4) boards - USA
Roundtoit (4) boards - USA
TboneAK (4) boards - USA
twitchie (4) boards - Canada
spind (2) boards - Canada
Russellc (4) boards -USA
batty (4) boards - Australia
TungstenAudio (4) boards - USA
zman01 (2) - USA
dBel84 (2) boards - USA
BigE (4) TH boards -Canada
wcwc (2) boards - USA
BRN (2) boards - USA
jwjarch (4) boards - USA
poseidonsvoice (2) boards - USA
tomservo (4) boards - USA
mordikai (4) boards- USA
asanden (4) boards - NL
Vunce (4) boards - USA
vvs07 (4) boards - USA
BEYoung (4) boards - USA
Roundtoit (4) boards - USA
TboneAK (4) boards - USA
revised my order.
__________________
spind (2) boards - Canada
Russellc (4) boards -USA
batty (4) boards - Australia
TungstenAudio (4) boards - USA
zman01 (2) - USA
dBel84 (2) boards - USA
BigE (4) TH boards -Canada
wcwc (2) boards - USA
BRN (2) boards - USA
jwjarch (4) boards - USA
poseidonsvoice (2) boards - USA
tomservo (4) boards - USA
mordikai (4) boards- USA
asanden (4) boards - NL
Vunce (4) boards - USA
vvs07 (4) boards - USA
BEYoung (4) boards - USA
Roundtoit (4) boards - USA
TboneAK (4) boards - USA
revised my order.
__________________
X,
Maybe it's due to the pic (I am not sure)- but the volume pot is positioned towards the rear end of the board and looks difficult to reach without a shaft extender... any chance of bringing it a bit forward?
Otherwise layout looks impressive as usual, thanks to JP - we are a bit spoiled.
Maybe it's due to the pic (I am not sure)- but the volume pot is positioned towards the rear end of the board and looks difficult to reach without a shaft extender... any chance of bringing it a bit forward?
Otherwise layout looks impressive as usual, thanks to JP - we are a bit spoiled.
I think JP can accommodate that - or perhaps you may need to remotely mount the pot......
Kind of like this
Attachments
Hi Zman01,
JPS64 likes to place the pot symmetrically in the middle of the board so it’s ground pins are on the star ground hub. There are two ground planes left:right and they are split right through the middle of the pot (middle layer between two pot discs). I don’t think he is going to move it closer to the edge as that is not the ideal location from grounding and low noise standpoint - I know, as I have asked before myself
JPS64 likes to place the pot symmetrically in the middle of the board so it’s ground pins are on the star ground hub. There are two ground planes left:right and they are split right through the middle of the pot (middle layer between two pot discs). I don’t think he is going to move it closer to the edge as that is not the ideal location from grounding and low noise standpoint - I know, as I have asked before myself
Hi folks,
ok for ALPS but I‘m not a fan (had in the past big problem with this type) of this type: TKD CP601 (not cheap but my fav) already in parallel.
I‘ll propose something for the guys who like to put pot near to front.
Thinking finishing (with X checking) for end of this week.
JP
ok for ALPS but I‘m not a fan (had in the past big problem with this type) of this type: TKD CP601 (not cheap but my fav) already in parallel.
I‘ll propose something for the guys who like to put pot near to front.
Thinking finishing (with X checking) for end of this week.
JP
twitchie (4) boards - Canada
spind (2) boards - Canada
Russellc (4) boards -USA
batty (4) boards - Australia
TungstenAudio (4) boards - USA
zman01 (2) - USA
dBel84 (2) boards - USA
BigE (4) TH boards -Canada
wcwc (2) boards - USA
BRN (2) boards - USA
jwjarch (4) boards - USA
poseidonsvoice (2) boards - USA
tomservo (4) boards - USA
mordikai (4) boards- USA
asanden (4) boards - NL
Vunce (4) boards - USA
vvs07 (4) boards - USA
BEYoung (4) boards - USA
Roundtoit (4) boards - USA
TboneAK (4) boards - USA
Meanie (4) boards - Singapore
spind (2) boards - Canada
Russellc (4) boards -USA
batty (4) boards - Australia
TungstenAudio (4) boards - USA
zman01 (2) - USA
dBel84 (2) boards - USA
BigE (4) TH boards -Canada
wcwc (2) boards - USA
BRN (2) boards - USA
jwjarch (4) boards - USA
poseidonsvoice (2) boards - USA
tomservo (4) boards - USA
mordikai (4) boards- USA
asanden (4) boards - NL
Vunce (4) boards - USA
vvs07 (4) boards - USA
BEYoung (4) boards - USA
Roundtoit (4) boards - USA
TboneAK (4) boards - USA
Meanie (4) boards - Singapore
I think it is time to close the first GB for the Melbourne DB's. If your name is on this list, please send me a PM with your PayPal account email, qnty ordered, and country to ship to, and I will send you an invoice. Price as stated earlier is $20/pair and $5 for tracked shipping to US address, $10 to CAN address, and $15 everywhere else.
Thanks,
X
Thanks,
X
twitchie (4) boards - Canada
spind (2) boards - Canada
Russellc (4) boards -USA
batty (4) boards - Australia
TungstenAudio (4) boards - USA
zman01 (2) - USA
dBel84 (2) boards - USA
BigE (4) TH boards -Canada
wcwc (2) boards - USA
BRN (2) boards - USA
jwjarch (4) boards - USA
poseidonsvoice (2) boards - USA
tomservo (4) boards - USA
mordikai (4) boards- USA
asanden (4) boards - NL
Vunce (4) boards - USA
vvs07 (4) boards - USA
BEYoung (4) boards - USA
Roundtoit (4) boards - USA
TboneAK (4) boards - USA
Meanie (4) boards - Singapore
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Melbourne Daughterboard for M2X