• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Matched IRF FET's

Status
Not open for further replies.
Jump to Latest
#101
Hi Jeffry,

Pls send me a private mail. The current price is 11,40 euro per set of 3 IRFP240 or IRFP9240.

For 75 people that would be around 450 fets in total. I can help you getting the fets out of the same wafer and get them selected.
That is a serious amount of fets and would require some time to get them an then a week or two to select them.

Pls scout the interest and let me know by mail.

Thanks...Marcel.
 
#105
jleaman said:
I email'd you too, id like to know what it will cost for all transistor's for a stereo F4, i thin i got a email way back stating each output moss fet was like 8$ each OUCH..

Can any one post what they paid for there price for 2 channels of their F4 ?

I have to buy fets for 4 channels and need a clear price.

Thanks.

Jase
Click to expand...


Hi Jase,

It looks like a mistake has been made. I do realize that the conversion rate between the dollar and the euro has changed from 1.2 last year to around 1.37. This is not making things better for everyone in the States...
I'm going to look again to your mail to see where the mistake was made.
 
#106
Tarasque said:



Hi Jase,

It looks like a mistake has been made. I do realize that the conversion rate between the dollar and the euro has changed from 1.2 last year to around 1.37. This is not making things better for everyone in the States...
I'm going to look again to your mail to see where the mistake was made.
Click to expand...


It's ok every one makes mistakes 🙂 i wonder if you could possibly give me a price to build 4 channels with shipping?

Thanks..

Jase
 
#110
Tarasque said:



Hi Jase,

It looks like a mistake has been made. I do realize that the conversion rate between the dollar and the euro has changed from 1.2 last year to around 1.37. This is not making things better for everyone in the States...
I'm going to look again to your mail to see where the mistake was made.
Click to expand...

when the FFR went into the Euro it was very inexpensive -- for years previously it ranged from about 4.5 to 5.2 FFR/USD. The EUR is a little expensive relative to the dollar, but was much too cheap when the conversion was made.

The weak USD is causing an absolute boom in exports from the US for everything from food, pharma, electrical equipment, wire and cable, wood products, medical equipment, construction equipment, chemical, specialty chemicals, instrumentation, aerospace etc.
 
Status
Not open for further replies.
Top Bottom