Would you be kind enough to send me a quote for a set of irfp240/irfp9240 for an F4 amp? I will probably want to make a second one in the future so if that's a consideration as to what these are matched to...... (if up and over biamped, i guess it wont matter too much but maybe if bridged monoblocks it might)
Im in the UK btw
Many thanks
Dave
Im in the UK btw
Many thanks
Dave
Hi H_A,
I am looking for matched fets for the Aleph 30 project.
That should be 12 (two sets of 6 each ) IRFP240 matched (inside the set of 6) or how many matched would you have in the set ? Example Digikey ID - IRFP240PBF-ND
Total 4 (two sets by 2) matched IRF9610 - Example Digikey ID - IRF9610PBF-ND
I am thinking whether IRF9610 can be replaced with IRFP9240 that you are offering
Let me know what you would have available and the pricing
Regards,
Oleg
I am looking for matched fets for the Aleph 30 project.
That should be 12 (two sets of 6 each ) IRFP240 matched (inside the set of 6) or how many matched would you have in the set ? Example Digikey ID - IRFP240PBF-ND
Total 4 (two sets by 2) matched IRF9610 - Example Digikey ID - IRF9610PBF-ND
I am thinking whether IRF9610 can be replaced with IRFP9240 that you are offering
Let me know what you would have available and the pricing
Regards,
Oleg
By the way, please point me to your prefered IRFP240 version of the F6 schematic as all I can find uses R100.
Here's the schematic for the only version of the F6 that I'm aware of.
http://www.diyaudio.com/forums/pass-labs/258613-diyaudio-firstwatt-f6.html#post3979679
Can you give me a price for 2 matched pairs of IRFP240 for the F6 including shipping to the U.S.?
Thanks...
Hi all,
please excuse again the delay, too many travels currently
I assume you want to use IRFP240's for the output.
From the schematic I would say this amp should also work with unmatched fets. However, I don't have experience with it, so if you prefer the output pair to be matched I can certainly offer you that.
I'll mail you the details
please excuse again the delay, too many travels currently
I assume you want to use IRFP240's for the output.
From the schematic I would say this amp should also work with unmatched fets. However, I don't have experience with it, so if you prefer the output pair to be matched I can certainly offer you that.
I'll mail you the details
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.