Lundahl for TU-8200

[vkung]

The Lundahl is good for TU-8200 and TU-8200R.
I will have the first sample next week..
This Lundahl is similar to the Lundahl of TU-8800.
It is time consuming to make it

 

[Tyso]

Are you go going to offer the 8200-R with the Lundhal OPT as part of a kit for a first time build as well (instead of just an upgrade to an already built model)? If so, I’d be interested in that. Thanks.

 

[alohabob]

I do have the tu 8200. Thanks for the info

 

[vkung]

Both TU-8200 and TU-8200R have the same OPT..

 

[sunil]

Victor, are the specs similar to the stock OPT (3.5K). Can we expect any changes ?

 

[vkung]

is the same...
THank you Mr Lundahl designs this PCB

 

[Wansmith]

Hi Victor - confirming that I will be keen to purchase as soon as they become available.
Cheers

 

[vkung]

I am waiting the first sample
& PCB
Please stay tuned

 

[sunil]

is the same...
THank you Mr Lundahl designs this PCB
https://postimages.org/

Thanks Victor. Nice.

So we can expect the same specs but possibly better performance from the Lundahl touch.

 

[vkung]

 

[vkung]

here is the LAYOUT OF Lundahl 2777B for TU-8200
THE CONSTRUCTION IS SAME AS THE LUNDAHL FOR TU-8800. PLEAE STAY TUNED.

 

[SandorS]

Victor,

Please is the Lundahl 6.0 volts as the stock transformer or is 6.3 V ( or a different value)?

Thanks

Sandor

 

[paczeltf]

Please is the Lundahl 6.0 volts as the stock transformer or is 6.3 V ( or a different value)?

You may have misunderstood something. These Lundahls are output transformers, the power transformer and its winding for heaters remain the same.

 

[SandorS]

Thanks

 

[vkung]

Just received the PCB for LL2777B

 

[sunil]

You're torturing us Victor. Pics of the OPTs mate !😀

 

[vkung]

Lundahl LL2777B is available next week

It is $310 a pair with PCB Board + HV cables.
The construction of LL2777B is same as LL2783C (TU-8800).

 

[milanstastny]

Hi Victor, be so kind and reserve one pair of Lundhals for me please. How should I make an order and payment? I would like to buy one piece of the TKD 2CP-601 PCB for TU-8600SVK and one piece of the TKD 2CP-601 potenciometer too, if you have it on stock. Thank you very much.

 

[vkung]

Please send your email to info@vkmusic.ca
I only have 20 pairs. 10 pairs were sold

 

[vkung]

in ordrr to do a good job , the thickness of the solder should be around 0.3~0.35cm

https://flic.kr/p/2k6BeSr https://www.flickr.com/photos/64593884@N08/,


https://flic.kr/p/2k6FDtq https://www.flickr.com/photos/64593884@N08/,

https://flic.kr/p/2k6FDun https://www.flickr.com/photos/64593884@N08/,