Any good places to buy tubes and transformers off the shelf in Los Angeles? Apex and Apex jr are great for sockets and resistors and wire. I have yet to find a good source of the other parts on the shelf.
What are you looking for?
Both my brother and myself carry tubes and transformers
in stock.
Steve
Both my brother and myself carry tubes and transformers
in stock.
Steve
I live in the valley and, while I am not a dealer at present, do have a pile of parts, mostly NOS, that would love to go to someone who can use them.
I'm looking for SE output transformers in the 10 - 15 watt 5k area of decent quality (edcor not Tamura). Gotne?
Apex jr, I see you have a 5v at 14A, that would be like hunting mice with a M1 tank, anything smaller?
PS Steve, I used to buy from you twenty+ years ago while you were still at your Dad's in Sun Valley! You always had something cool hidden away that you would surprise me with!
Apex jr, I see you have a 5v at 14A, that would be like hunting mice with a M1 tank, anything smaller?
PS Steve, I used to buy from you twenty+ years ago while you were still at your Dad's in Sun Valley! You always had something cool hidden away that you would surprise me with!
You might have to do a little research but here are just a few of the
transformers I have in stock, some are just 1 ea and some 2-3 only.
Output
Stancor A 3877
Single 5K Ohm Plate to 4 Ohm 40Ma 5W
Thordanson 22S21
4K to 8 -16-32 Ohm
Filament;
Stancor P 6466
6.3Vct at 2 A
Magnatek FS10-110
10Vct .11A - 5V .22A
Triad F38A
6.3V 1A, 5Vct 2A, 5V 4 A, 6.3V 5A and 6.3Vct 5A
I thought I had a 5V 10A but can't seem to find since my move.
plus I'm sure there's more on the shelves, you might want to call
and stop by, and really see what I have.
Steve
transformers I have in stock, some are just 1 ea and some 2-3 only.
Output
Stancor A 3877
Single 5K Ohm Plate to 4 Ohm 40Ma 5W
Thordanson 22S21
4K to 8 -16-32 Ohm
Filament;
Stancor P 6466
6.3Vct at 2 A
Magnatek FS10-110
10Vct .11A - 5V .22A
Triad F38A
6.3V 1A, 5Vct 2A, 5V 4 A, 6.3V 5A and 6.3Vct 5A
I thought I had a 5V 10A but can't seem to find since my move.
plus I'm sure there's more on the shelves, you might want to call
and stop by, and really see what I have.
Steve
Most of my transformers are filament, plate, and solid state voltages, and a few chokes and low level transformers. Some unmarked - I'd have to weigh them to guess the power output. Not so easy with multiple secondaries.
That Triad makes me warm and fuzzy. I'll give you a call and see if sometime Monday would be good to swing by. I need sockets and assorted other goodies.
Last year I was in LA and checked out numbers of tube suppliers - I can highly recommend Darcell (ElectronTube.com, the Internet Store for DARCELL) and I bought a fair quantity of tubes from them. Alex and Peggy are really great people ( Alex is the late Bo Diddley's cousin!!) and were very helpful🙂
I knew Diddley....well, actually I met him once but getting to say 'I know Diddley' is one of those once in a lifetime opportunities.😀
- Status
- Not open for further replies.