Los Angeles

[no gas]

Any good places to buy tubes and transformers off the shelf in Los Angeles? Apex and Apex jr are great for sockets and resistors and wire. I have yet to find a good source of the other parts on the shelf.

 

[Apex Jr]

What are you looking for?

Both my brother and myself carry tubes and transformers
in stock.

Steve

 

[bob91343]

I live in the valley and, while I am not a dealer at present, do have a pile of parts, mostly NOS, that would love to go to someone who can use them.

 

[no gas]

I'm looking for SE output transformers in the 10 - 15 watt 5k area of decent quality (edcor not Tamura). Gotne?
Apex jr, I see you have a 5v at 14A, that would be like hunting mice with a M1 tank, anything smaller?
PS Steve, I used to buy from you twenty+ years ago while you were still at your Dad's in Sun Valley! You always had something cool hidden away that you would surprise me with!

 

[Apex Jr]

You might have to do a little research but here are just a few of the
transformers I have in stock, some are just 1 ea and some 2-3 only.

Output
Stancor A 3877
Single 5K Ohm Plate to 4 Ohm 40Ma 5W

Thordanson 22S21
4K to 8 -16-32 Ohm

Filament;

Stancor P 6466
6.3Vct at 2 A

Magnatek FS10-110
10Vct .11A - 5V .22A

Triad F38A
6.3V 1A, 5Vct 2A, 5V 4 A, 6.3V 5A and 6.3Vct 5A

I thought I had a 5V 10A but can't seem to find since my move.
plus I'm sure there's more on the shelves, you might want to call
and stop by, and really see what I have.


Steve

 

[bob91343]

Most of my transformers are filament, plate, and solid state voltages, and a few chokes and low level transformers. Some unmarked - I'd have to weigh them to guess the power output. Not so easy with multiple secondaries.

 

[no gas]

You might have to do a little research but here are just a few of the
transformers I have in stock, some are just 1 ea and some 2-3 only.

Output
Stancor A 3877
Single 5K Ohm Plate to 4 Ohm 40Ma 5W

Thordanson 22S21
4K to 8 -16-32 Ohm

Filament;

Stancor P 6466
6.3Vct at 2 A

Magnatek FS10-110
10Vct .11A - 5V .22A

Triad F38A
6.3V 1A, 5Vct 2A, 5V 4 A, 6.3V 5A and 6.3Vct 5A

I thought I had a 5V 10A but can't seem to find since my move.
plus I'm sure there's more on the shelves, you might want to call
and stop by, and really see what I have.


Steve

That Triad makes me warm and fuzzy. I'll give you a call and see if sometime Monday would be good to swing by. I need sockets and assorted other goodies.

 

[gcwills]

Last year I was in LA and checked out numbers of tube suppliers - I can highly recommend Darcell (ElectronTube.com, the Internet Store for DARCELL) and I bought a fair quantity of tubes from them. Alex and Peggy are really great people ( Alex is the late Bo Diddley's cousin!!) and were very helpful

 

[Apex Jr]

That Triad makes me warm and fuzzy. I'll give you a call and see if sometime Monday would be good to swing by. I need sockets and assorted other goodies.

Cool... I'll look forward to it.

Steve

 

[no gas]

Last year I was in LA and checked out numbers of tube suppliers - I can highly recommend Darcell (ElectronTube.com, the Internet Store for DARCELL) and I bought a fair quantity of tubes from them. Alex and Peggy are really great people ( Alex is the late Bo Diddley's cousin!!) and were very helpful

I knew Diddley....well, actually I met him once but getting to say 'I know Diddley' is one of those once in a lifetime opportunities.