Thumb Screws & Nuts - Knurled Thumb Screws - Captive Thumb Screws
You might have to buy through a dealer.
You might have to buy through a dealer.
I'd order whatever size of McMaster-Carr
I wanted to use.
I usually choose a #8-32 screw passed through the case and locked down with nuts. Then the brass knurled nut is used to secure the wire or lug to the stud. Easy and cheap.
I wanted to use.
I usually choose a #8-32 screw passed through the case and locked down with nuts. Then the brass knurled nut is used to secure the wire or lug to the stud. Easy and cheap.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Design & Build
- Parts
- Looking to source Phono Preamp Grounding Post's