Hello Burbeck,
did you ever get your schematic ?
if so from where and if not did you resolve the problem ?
I have what sounds like the same problem on the Intek, suddenly both channels are lost from all inputs, problem seems to rectify itself if the equipment is left for days sometimes weeks. Obviously this is not a practical solution.
did you ever get your schematic ?
if so from where and if not did you resolve the problem ?
I have what sounds like the same problem on the Intek, suddenly both channels are lost from all inputs, problem seems to rectify itself if the equipment is left for days sometimes weeks. Obviously this is not a practical solution.
Hi Burbeck,
the Thermistor I have replace, but the Power transistors are to hot (in approx 20 min) , also q602 and q409 to. I have replaced all this critical ZTX... transistors and their capacitors also 22µ. Power Transistors are OK and their Drivers to.
Do you or any from here have any suggestions?
thanks
the Thermistor I have replace, but the Power transistors are to hot (in approx 20 min) , also q602 and q409 to. I have replaced all this critical ZTX... transistors and their capacitors also 22µ. Power Transistors are OK and their Drivers to.
Do you or any from here have any suggestions?
thanks
I too would appreciate a schematic. I've just won one of these with whta sounds like a temp cutout issue...also msuspect same as you guy's.
Many thanks.
PS just found this board, looks really good. Most of my kit is Radford: Valve, Tranny and speakers. I also have collection of Rafrod test kit.
Many thanks.
PS just found this board, looks really good. Most of my kit is Radford: Valve, Tranny and speakers. I also have collection of Rafrod test kit.
Hello
After a search it seem that this NTC thermistor for the Linn Intek are same than this one who have 25k ohm at room temp;
RL2006-13.3K-140-D1
You can find it there;
http://parts.digikey.com/1/parts/953961-thermistor-ntc-25k-ohm-25c-rl2006-13-3k-140-d1.html
http://ca.mouser.com/Search/ProductDetail.aspx?qs=krgwt1zShiy0nuv2bt2oMQ==
Bye
Gaetan
After a search it seem that this NTC thermistor for the Linn Intek are same than this one who have 25k ohm at room temp;
RL2006-13.3K-140-D1
You can find it there;
http://parts.digikey.com/1/parts/953961-thermistor-ntc-25k-ohm-25c-rl2006-13-3k-140-d1.html
http://ca.mouser.com/Search/ProductDetail.aspx?qs=krgwt1zShiy0nuv2bt2oMQ==
Bye
Gaetan
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- Linn Intek Schematic required