I am looking for an URL, where are listed all vintage stereo AM/FM receiver so as vintage integrated amps/power amps, which have no DC coupled (resp. no direct coupled) loudspeaker outputs (i. e. a serial capacitor between output and speaker terminal).
Serial capacitors are in use more like in older models, the newer ones have often been changed to symmetrical voltage suooly and direct coupled speaker output. An example is the Marantz 2230 (AC coupled output) and its successor 2230B with DC output (see attachment)
Pioneer, Kenwood, Sansui and much others really should also have such devices built. The SX300 is an additional example - have a look to the pics from
http://www.hifi-forum.de/viewthread-84-11738.html
The great advantage is the possibility, to replace the caps in series to the speakers against precisely tailored values for getting best sonic results in the lower frequency aera (also in order to the corresponding loudspeaker allocation - e. g. sometimes near by the wall and sometimes not) and the absence of serial contacts from relays for DC protect. This is not easy to reach with DC speaker outputs.
Who can send me an advice for such URLs??
in the attachment you will find another example from the Marantz 1060
Thank you for your advices.
Serial capacitors are in use more like in older models, the newer ones have often been changed to symmetrical voltage suooly and direct coupled speaker output. An example is the Marantz 2230 (AC coupled output) and its successor 2230B with DC output (see attachment)
Pioneer, Kenwood, Sansui and much others really should also have such devices built. The SX300 is an additional example - have a look to the pics from
http://www.hifi-forum.de/viewthread-84-11738.html
The great advantage is the possibility, to replace the caps in series to the speakers against precisely tailored values for getting best sonic results in the lower frequency aera (also in order to the corresponding loudspeaker allocation - e. g. sometimes near by the wall and sometimes not) and the absence of serial contacts from relays for DC protect. This is not easy to reach with DC speaker outputs.
Who can send me an advice for such URLs??
in the attachment you will find another example from the Marantz 1060
Thank you for your advices.
Attachments
Last edited:
thank you.Akai AA810, most if not all Luxor stereos, Luma.
There must be much more models - here an example:
CA202 Nytech post #10
http://www.diyaudio.com/forums/solid-state/154493-your-opinion-about-schematics.html
Typical power amp topology:
Black Devil (Gerhard Haas, ELRAD, Experience Electronics) post #39
http://www.diyaudio.com/forums/solid-state/154493-your-opinion-about-schematics-4.html
Please let me know more - thank you
Attachments
Last edited:
Many of the old Marantz 22XXb models used output capacitors and were some fine sounding amps. Example being 2215b. Marantz 2215B | Owners Manual, Service Manual, Schematics, Free Download | HiFi Engine
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
TANDBERG TR1000 series is a good example. Also the tiny good TR200. But I believe You want som pictures too?
Well, if I get the time I will provide such.
Well, if I get the time I will provide such.
And then I would like to remind of that particular configuration used by Grundig for the RTV350/360/370/380 receivers in the late sixties. Those were not hifi (less than 10 watts per channel) but for background home music and were installed in wooden radiograms.
In those sets, the capacitor is between the output center and ground, and the speakers are connected directly between the collector of the "upper" transistor and ground.
In this configuration, a separate secondary, rectifier and reservoir capacitor was needed for each channel.
The advantage for all this complication seems to be avoidance of power-on and power-off thumps.
In those sets, the capacitor is between the output center and ground, and the speakers are connected directly between the collector of the "upper" transistor and ground.
In this configuration, a separate secondary, rectifier and reservoir capacitor was needed for each channel.
The advantage for all this complication seems to be avoidance of power-on and power-off thumps.
My (quite old) Sansui 800.....🙂
Thank you.TANDBERG TR1000 series is a good example. Also the tiny good TR200. But I believe You want som pictures too?
Well, if I get the time I will provide such.
Tandberg TR-200 overhaul | Flickr - Photo Sharing!
Tandberg TR-1000 - garmonizer - Photo.Qip.ru / id: val
I have save some images from "hard to find" Grundig' RTV250 from already deleted auction URLs (found by google image search).
The Grundig RTV350 was those device, where I have first time listening stereo sound (a radio play by a German radio station - NDR if I recall right in the year 1967). It was very interesting to hear, as a train from left to right drove past.
Attachments
Last edited:
Harman-Kardon 330A, 330B
Harman-Kardon 330A, 330B (and not speaker DC coupled 330C)
Le forum Audio Vintage • Afficher le sujet - Harman-Kardon 330B
Harman Kardon Stereo Receiver Model 330A
http://www.harmankardon.com/resourc...elatedDocuments/en-US/OwnersManual/330BOM.PDF
HARMAN KARDON 330B SM Service Manual free download, schematics, eeprom, repair info for electronics
Harman Kardon 330C restoration - AudioKarma.org Home Audio Stereo Discussion Forums
Harman-Kardon 330A, 330B (and not speaker DC coupled 330C)
Le forum Audio Vintage • Afficher le sujet - Harman-Kardon 330B
Harman Kardon Stereo Receiver Model 330A
http://www.harmankardon.com/resourc...elatedDocuments/en-US/OwnersManual/330BOM.PDF
HARMAN KARDON 330B SM Service Manual free download, schematics, eeprom, repair info for electronics
Harman Kardon 330C restoration - AudioKarma.org Home Audio Stereo Discussion Forums
Attachments
Last edited:
Heed Integrated Amplifier "Obelisk" series (Nytech, ION)
http://www.diyaudio.com/forums/solid-state/128128-nytech-ca252-woes-5.html
http://www.diyaudio.com/forums/solid-state/34985-ion-obelisk.html
6moons audio reviews: Heed Audio Obelisk Series Trio
The noble HEED Obelisk Owners Society, Verstärker/Receiver - HIFI-FORUM (Seite 12)
Heed Audio kuvia
Help with choosing new amp & cd player for Epos M12.2 speakers - Page 2
Heed
http://www.diyaudio.com/forums/solid-state/214899-diy-project-nytech-cpa602-today.html#post3067818
Recapping of Nytech CPA 602 - pink fish media
http://www.diyaudio.com/forums/solid-state/214112-nytech-ca252-help-request.html
http://www.diyaudio.com/forums/solid-state/128128-nytech-ca252-woes-5.html
http://www.diyaudio.com/forums/solid-state/34985-ion-obelisk.html
6moons audio reviews: Heed Audio Obelisk Series Trio
The noble HEED Obelisk Owners Society, Verstärker/Receiver - HIFI-FORUM (Seite 12)
Heed Audio kuvia
Help with choosing new amp & cd player for Epos M12.2 speakers - Page 2
Heed
http://www.diyaudio.com/forums/solid-state/214899-diy-project-nytech-cpa602-today.html#post3067818
Recapping of Nytech CPA 602 - pink fish media
http://www.diyaudio.com/forums/solid-state/214112-nytech-ca252-help-request.html
Attachments
Nytech CA202
http://www.diyaudio.com/forums/solid-state/154493-your-opinion-about-schematics.html (post #10)
http://www.diyaudio.com/forums/solid-state/154493-your-opinion-about-schematics.html (post #10)
I'm just listening to an old rebuild Nytech CPA 602 Clone ...
Sounds wunderfull🙂
Ok, some improvements are in .... But still a Nytech🙂
Sounds wunderfull🙂
Ok, some improvements are in .... But still a Nytech🙂
Nytech CTA-252 XD
go to post #5 about
http://www.diyaudio.com/forums/analogue-source/242538-high-missing-phono-stage.html#post3632793
line-up Nytech models:
http://www.pinkfishmedia.net/forum/showthread.php?t=107603
also without DC coupling at the output - Heed-Audio model Obelisk-SI with outdoor power supply:
http://heedaudio.hu/en/products/obelisk-line/si
http://www.fairaudio.de/leserberichte/2011/heed-obelisk-si-vollverstaerker-x2-netzteil-1.html
http://www.ampl-hifi.com/index.php?...ategory_id=16&option=com_virtuemart&Itemid=30
go to post #5 about
http://www.diyaudio.com/forums/analogue-source/242538-high-missing-phono-stage.html#post3632793
line-up Nytech models:
http://www.pinkfishmedia.net/forum/showthread.php?t=107603
also without DC coupling at the output - Heed-Audio model Obelisk-SI with outdoor power supply:
http://heedaudio.hu/en/products/obelisk-line/si
http://www.fairaudio.de/leserberichte/2011/heed-obelisk-si-vollverstaerker-x2-netzteil-1.html
http://www.ampl-hifi.com/index.php?...ategory_id=16&option=com_virtuemart&Itemid=30
Last edited:
Sherwood SD-7100
And SD-7200
Made in Chicago, U.S.A.
Nice devices - thank you
Why do we love these old Sherwoods ? - AudioKarma.org Home Audio Stereo Discussion Forums
Vintage 70's Stereo System
More models wanted.
- Home
- Amplifiers
- Solid State
- Line-up (Overview) of Vintage Receiver Models with AC Speaker Output (not DC) wanted