He said its his personal speaker and its not for sale and there is no kit for it. That has to be the biggest speaker I've ever seen.
Well there is that fellow with the 30" subwoofer driven by 15kW of amplification.
https://diy.midwestaudio.club/discussion/2040/monster-30-subwoofer
I thought 21" or 24" was big enough, and I would only install them flush with walls or floors to be out of sight...
https://diy.midwestaudio.club/discussion/2040/monster-30-subwoofer
I thought 21" or 24" was big enough, and I would only install them flush with walls or floors to be out of sight...
The first thing to do when designing a loudspeaker is to treat your room.
On the loudspeaker front, I came across this DIY speaker 15, which looks kind a good and is based on Beyma drivers:
I saw another one, red, but I cannot find the link...
On the loudspeaker front, I came across this DIY speaker 15, which looks kind a good and is based on Beyma drivers:
I saw another one, red, but I cannot find the link...
(I don't know what they sound like)
Voxativ Ampeggio,BLH - Piano finish $$$$$ HWD 47 x16x16 inches (120x40x40 cm)
You could build a look alike (cabinet Clone, their drivers are $$$$$).
Use the SB Acoustics SB20FRPC30-8 (qts.4) or other driver .
https://www.audiohobby.eu/en/sb-aco...acoustics-sb20frpc30-8-paper-fullrange-8.html
Mauhorn BLH with a driver with high qts.7
http://www.audiodesignguide.com/Fullrange-Speakers/Fullrange-Speakers_project.html
If it sounds great, Hooray you didn't spend $44,900
If it sounds terrible, Hooray you didn't spend $44,900
"from $44,900.00" "low-volume MDF speaker cabs" "Schimmel Piano"
https://voxativ.berlin/ampeggio
https://www.6moons.com/audioreviews/voxativ/voxativ.html
See post#35 Voxativ VX Acousta 3 plans (46.5" or 1181 cm height)
https://www.superbestaudiofriends.o...ck-loaded-horn-enclosure-designs.11923/page-2
Voxativ Ampeggio,BLH - Piano finish $$$$$ HWD 47 x16x16 inches (120x40x40 cm)
You could build a look alike (cabinet Clone, their drivers are $$$$$).
Use the SB Acoustics SB20FRPC30-8 (qts.4) or other driver .
https://www.audiohobby.eu/en/sb-aco...acoustics-sb20frpc30-8-paper-fullrange-8.html
Mauhorn BLH with a driver with high qts.7
http://www.audiodesignguide.com/Fullrange-Speakers/Fullrange-Speakers_project.html
If it sounds great, Hooray you didn't spend $44,900
If it sounds terrible, Hooray you didn't spend $44,900
"from $44,900.00" "low-volume MDF speaker cabs" "Schimmel Piano"
https://voxativ.berlin/ampeggio
https://www.6moons.com/audioreviews/voxativ/voxativ.html
See post#35 Voxativ VX Acousta 3 plans (46.5" or 1181 cm height)
https://www.superbestaudiofriends.o...ck-loaded-horn-enclosure-designs.11923/page-2
Last edited:
The first thing to do when designing a loudspeaker is to treat your room.
On the loudspeaker front, I came across this DIY speaker 15, which looks kind a good and is based on Beyma drivers:
View attachment 1112653
I saw another one, red, but I cannot find the link...
Link doesn't work. Any other link ?
Last edited:
Thanks.
Something like the dunlavy VI would be nice as a diy project. Its over 500 lbs a piece and over 6 feet tall.
Something like the dunlavy VI would be nice as a diy project. Its over 500 lbs a piece and over 6 feet tall.
- Home
- Loudspeakers
- Multi-Way
- Large DIY towers that compete with TOTL commercial?