KSA50 AMP（New production Live in...）

[gxcnabin]

Thank you a lot Neychi for the input

4 x 20.000 uf 😱

Hip Hip Horeee ... Uncle Jacco Here

As for uses the big capacitor, I thought that try, contrasts. Each person's request is dissimilar, this also does not have the standard, not right?

 

[gxcnabin]

Hi! Pocoyo
How progresses?
The vacuum tube Pre-amplifier very quick will complete.

 

[tangmonster]

I am soldering like a mad man 🙂

 

[gxcnabin]

I am soldering like a mad man 🙂

Does not plan the upload picture?

 

[tangmonster]

I'll do so. 🙂 Nothing much to see still need a few odd components.

 

[Pocoyo]

I am soldering like a mad man 🙂

your board has more parts add compare the pinkmouse PCB 😱

Abin you build KSA100 PCB too.
Which you think better ?

 

[Pocoyo]

Does not plan the upload picture?

Atok Purnomo will upload soon 😎

 

[gxcnabin]

Atok Purnomo will upload soon 😎

Too good! My cabinet will send tomorrow from the factory.

 

[gxcnabin]

your board has more parts add compare the pinkmouse pcb 😱

Abin you build ksa100 pcb too.
Which you think better ?

ksa100....

 

[gxcnabin]

Speaks the truth, listens to the feeling not to have KSA50 to be pleasant to hear.

 

[Hellzero]

Special for Johnm : I tried to pm you, but it's impossible.

In fact, I need your zip file for the CDM4 replacement/calibration.

Just let me know how I could get it...

Thanks a lot,

Tony.

 

[tangmonster]

Here you go

I have all the gig devices.

All i still need is:

4 x 56k resistor
2 x 12V relay
4 x 27v 1W zener
4 x 470uF 63V
2 x 750 ohm resistor for relay
4 x 330pf capacitors

Before I can bolt it down onto a heatsink and power it up 🙂

 

[johnm]

Special for Johnm : I tried to pm you, but it's impossible.

In fact, I need your zip file for the CDM4 replacement/calibration.

Just let me know how I could get it...

Thanks a lot,

Tony.

Would have been better to put this into the Digital Source section, but yes I still have this zip file.

Give me an email address and I'll get that off to you.

Sorry for the thread-bust folks! (Perhaps this can be moved?)

- John

 

[gxcnabin]

Newest progress. .

 

[gxcnabin]

Here you go

I have all the gig devices.

All i still need is:

4 x 56k resistor
2 x 12V relay
4 x 27v 1W zener
4 x 470uF 63V
2 x 750 ohm resistor for relay
4 x 330pf capacitors

Before I can bolt it down onto a heatsink and power it up 🙂

refuels. . .

 

[AndrewT]

what's happened to the KSA50 part of this thread?

 

[tangmonster]

Hi gxcabin maybe you can create a seperate thread for the tube preamp stuff like under the tube part of the forum. And then we keep this thread for the ksa 50 board and it's assembly and tests.

I have no comment on random people chatting about zip files though.

 

[gxcnabin]

Hi gxcabin maybe you can create a seperate thread for the tube preamp stuff like under the tube part of the forum. And then we keep this thread for the ksa 50 board and it's assembly and tests.

I have no comment on random people chatting about zip files though.

OK!

 

[gxcnabin]

The RCA board completed.

 

[troystg]

Very nice...