Member
Joined 2009
Paid Member
Hey!
Steve!
Did we ever determine if the output stage switches or not? 😀
Enjoyed the thread back in 2009...
signed,
still curious
Steve!
Did we ever determine if the output stage switches or not? 😀
Enjoyed the thread back in 2009...
signed,
still curious
Member
Joined 2009
Paid Member
Bear you are a bad boy raising that old nugget !
I read the threads in a fair bit of detail. It does not switch at high frequencies, it can switch at low frequencies. It depends on the lifetime of minority carriers in the base region of the output devices. So those who say it does switch are correct, and those who say it doesn't switch are correct. Peace to all.
I read the threads in a fair bit of detail. It does not switch at high frequencies, it can switch at low frequencies. It depends on the lifetime of minority carriers in the base region of the output devices. So those who say it does switch are correct, and those who say it doesn't switch are correct. Peace to all.
Member
Joined 2009
Paid Member
Not without a redesign of the output stage.
You can use them as-is, just don't connect up the on-chip diodes.
Hi,
Search for posts of boraomega in one of the krill threads. He presented OPS design with thermal tracks. I´ve been using his desing for four years now.
Works like a charm!
Jarno
Search for posts of boraomega in one of the krill threads. He presented OPS design with thermal tracks. I´ve been using his desing for four years now.
Works like a charm!
Jarno
I'm not really interested in reopening that argument.
It does switch at DC but I don't listen to a lot of DC.
It does switch at DC but I don't listen to a lot of DC.
Hi,
Search for posts of boraomega in one of the krill threads. He presented OPS design with thermal tracks. I´ve been using his desing for four years now.
Works like a charm!
Jarno
http://www.diyaudio.com/forums/solid-state/134619-krill-little-amp-might-157.html#post1800898
Ahhh... yes, I read back a bit.
I see what is up... no problem.
Cap at the input = no DC. Of course. 😀
Anyhow, "if it sounds good, it is good" - Count Basie
Just wanted closure, got it now. No probs... enjoyed the discussion, happy to see there are satisfied users too. 😀
I see what is up... no problem.
Cap at the input = no DC. Of course. 😀
Anyhow, "if it sounds good, it is good" - Count Basie
Just wanted closure, got it now. No probs... enjoyed the discussion, happy to see there are satisfied users too. 😀
Member
Joined 2009
Paid Member
Thanks
I work on a zero feedback buffer like the krill
I found THD 20k 0.004% 1W and 0.005% 100W
Your circuit has impressive results from your simulations.
However, the Krill has two key features - in my opinion - that your circuit is missing:
a) Steve's unique biasing
b) Restricted charge suck-out of minority charge carriers which I believe is responsible for the great treble this amplifier is reported to produce.
- Status
- Not open for further replies.
- Home
- Amplifiers
- Solid State
- Krill - The little amp that might...