First of all I would like to thank everyone on this site for your liberal sharing of knowledge. I have learned so much in the past few days while researching my issue.
I have a JL Audio XD600\1 that i recently acquired from a friend. I have purchased new mosfets for the power supply, as well as the gate resistors. My issue is that I cannot identify what the gate driver transistors are in order to purchase them as well.
The board is a PCB rev 9. The transistors are SMD and seem to be of the S0T-23 package, but im not sure. The first transistor (Q26 and Q28) is marked longways with ZA and perpendicular to that is an 0H. The second transistor (Q2 and Q12) is marked longways with ZC and then perpendicular to that is 1F.
Thanks again for the help.
I have a JL Audio XD600\1 that i recently acquired from a friend. I have purchased new mosfets for the power supply, as well as the gate resistors. My issue is that I cannot identify what the gate driver transistors are in order to purchase them as well.
The board is a PCB rev 9. The transistors are SMD and seem to be of the S0T-23 package, but im not sure. The first transistor (Q26 and Q28) is marked longways with ZA and perpendicular to that is an 0H. The second transistor (Q2 and Q12) is marked longways with ZC and then perpendicular to that is 1F.
Thanks again for the help.
Thank you so much Perry! I figured it would be you who came through with an answer.
And, howdy from a local Louisianian!
And, howdy from a local Louisianian!
My XD600 mosfets are fried just like your pictures.. Would you provide the mosfets type that you used?
Thanks
Please don't post in a repair thread that was started by someone else unless you are trying to help them.
Start a new thread if you need help with a repair of your own.
Start a new thread if you need help with a repair of your own.