JL Audio 300/4 turn on without remote

[Mjimenez]

I've found the problem, it's another open track from r611 to pin 6, I'll make the bridge and see if it's the cause of my anguish

 

[Perry Babin]

I'd reinforce all that had any signs of corrosion.

 

[Mjimenez]

Indeed, that track was the fault, it is now working well, thank you very much Mr. Perry for your valuable support

 

[Perry Babin]

I figured you saw it but if you didn't, the JL section on the 'Repairing Physically Damaged Traces' in the directory may be helpful if you have to do this again.

 

[Mjimenez]

I have read it, but in this case the bridges or holes where they make a bridge are so tiny that they seem to be in good condition, in the end doing continuity tests and with your observation of lack of 12v the fault was detected, thank you very much