This group buy is now closed. All Omicron boards have been manufactured, assembled and tested (if requested) and shipped to participants.
If you want to be notified of future events concerning the Omicron headphone amplifier, drop me a PM.
Also, be sure to read through the main Omicron discussion thread - it is relatively short at 11 pages but is choke full of information.
If you want to be notified of future events concerning the Omicron headphone amplifier, drop me a PM.
Also, be sure to read through the main Omicron discussion thread - it is relatively short at 11 pages but is choke full of information.
Last edited:
I believe Alexcp requested a "running" list. i.e. copy and paste those before you.
I've taken the liberty of consolidating along with instructions.
--------------------------
Simply copy this sentence along with everything below into your post.... Add your line item. Note preserving the formatting requested may help the person running the GB to use delimiting and save them time when consolidating into a 'master sheet'.
Running List for Subscription :
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
I've taken the liberty of consolidating along with instructions.
--------------------------
Simply copy this sentence along with everything below into your post.... Add your line item. Note preserving the formatting requested may help the person running the GB to use delimiting and save them time when consolidating into a 'master sheet'.
Running List for Subscription :
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- Maybe -- USA (The maybe depends on the price
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- Maybe -- USA (The maybe depends on the price
This preserves the instructions as it moves through the thread ... hopefully helping others.
-----------------------
Simply copy this sentence along with everything below into your post.... Add your line item. Note preserving the formatting requested may help the person running the GB to use delimiting and save them time when consolidating into a 'master sheet'.
Running List for Subscription :
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- Maybe -- USA (The maybe depends on the price
-----------------------
Simply copy this sentence along with everything below into your post.... Add your line item. Note preserving the formatting requested may help the person running the GB to use delimiting and save them time when consolidating into a 'master sheet'.
Running List for Subscription :
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- Maybe -- USA (The maybe depends on the price
Re the price - an Omicron SMT board with all SMT parts pre-soldered will cost $100, including about $30 in parts. You'd need to add relays, electrolytic caps, film caps for the crosfeed (if using) and connectors (if using) - the total cost of parts that are not included would be about $10. I updated the first post in this thread, too.
Running List for Subscription :
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- Maybe -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- Maybe -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
Update after price information:
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- No -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- No -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
Running List for Subscription :
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- No -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
zgtc -- 0 -- 0 -- 1 -- no -- Spain
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- YES -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- No -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
zgtc -- 0 -- 0 -- 1 -- no -- Spain
Another update after price information:
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- no -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- No -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
zgtc -- 0 -- 0 -- 1 -- no -- Spain
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- no -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- No -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
zgtc -- 0 -- 0 -- 1 -- no -- Spain
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- no -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- No -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
zgtc -- 0 -- 0 -- 1 -- no -- Spain
DontHertzMe -- 1 -- 1 -- 1 -- No -- South Africa
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- Yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- no -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- No -- USA
MMark -- 0 -- 1 -- 1 -- No -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
zgtc -- 0 -- 0 -- 1 -- no -- Spain
DontHertzMe -- 1 -- 1 -- 1 -- No -- South Africa
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- no -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- no -- USA
MMark -- 0 -- 1 -- 1 -- no -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
zgtc -- 0 -- 0 -- 1 -- no -- Spain
DontHertzMe -- 1 -- 1 -- 1 -- no -- South Africa
Miggie78 -- 1 -- 1 -- 1 -- no -- Finland
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- no -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- no -- USA
MMark -- 0 -- 1 -- 1 -- no -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
zgtc -- 0 -- 0 -- 1 -- no -- Spain
DontHertzMe -- 1 -- 1 -- 1 -- no -- South Africa
Miggie78 -- 1 -- 1 -- 1 -- no -- Finland
Since only a few people want SMD boards pre-populated, those few will get fully assembled and tested boards at the same price.
Your name here on diyAudio -- TH board (#1), pieces -- PSU Board (#2), pieces - SMT board (#3), pieces -- Need SMT parts soldered -- Country to ship the board(s) to: e.g. alexcp -- 1 -- 1 -- 1 -- no -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- no -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- no -- USA
MMark -- 0 -- 1 -- 1 -- no -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
zgtc -- 0 -- 0 -- 1 -- no -- Spain
DontHertzMe -- 1 -- 1 -- 1 -- no -- South Africa
Miggie78 -- 1 -- 1 -- 1 -- no -- Finland
rockies914 -- 1-- 2 --1 -- yes -- USA
StevenCrook -- 1-- 2--1 -- no -- UK
al2002 -- 0 -- 2 -- 2 -- yes -- USA
ElArte -- 1 -- 1 -- 0 -- no -- USA
mlloyd1 -- 1-- 2-- 1 -- no--USA
jbau -- 2 -- 0 -- 0 -- no -- USA
MakarOFF -- 2 -- 2 -- 0 -- no -- Lithuania
mahtew -- 2 -- 2 -- 1 -- no -- Poland
ItsAllInMyHead -- 2 -- 4 -- 2 -- no -- USA
MMark -- 0 -- 1 -- 1 -- no -- USA
touchdown -- 2 -- 0 -- 0 -- no -- Italy
zgtc -- 0 -- 0 -- 1 -- no -- Spain
DontHertzMe -- 1 -- 1 -- 1 -- no -- South Africa
Miggie78 -- 1 -- 1 -- 1 -- no -- Finland
rockies914 -- 1-- 2 --1 -- yes -- USA