• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.
  • Home
  • Group Buys
  • Interest in PCBs for Bruno Putzey's Preamp and Hans Polak's relay volume control

Interest in PCBs for Bruno Putzey's Preamp and Hans Polak's relay volume control

Jump to Latest
#65
vasillis said:
payment sent

BR
Vasilis
Click to expand...

Received with thanks, shipping today.

Code: 
Name		BPPBP	Sel.	64step	16step	Services	Status
brianco		1	1	1	1	SMT soldering	Shipped
astromo 	1	3	3	0	-		Delivered
Bennyboyph  	1	1	1	1	SMT soldering	Shipped
cowanaudio	1	0	0	0			Delivered
Quantensprung	1	1	1	1	SMT soldering	PM sent
Mituisho	1	0	0	1			Delivered
shattered_dream 1	1	1	1			Shipped
Morde		1	0	0	1			Delivered
maartn		1	0	0	2	SMT soldering	Shipped
GfromG		1	0	0	0	SMT soldering	Shipped
pixelpusher 	0	0	1	1			Delivered
av-trouvaille  	0	1	2	0			Shipped
vasillis 	0	0	0	2	SMT soldering	Shipping today
Johnny Canuck	0	1	2	0			Shipped
toastytoy	1	0	1	0			PM sent
Mike2		1	0	0	1	SMT soldering	Delivered
AlphaC		1	1	1	0			Shipped
ergo		0	0	1	1			Shipped
sebbyp		1	1	1	1			Shipped
grayblob	1	1	1	1			PM sent
outtek		1	1	1	1			PM sent
tjencks		2	0	0	0			PM sent
Total		18	13	18	16
 
#67
I am using the Vicol controller. This is working well for me now but Vicol is out of business and I don't think the controller is available. The firmware is proprietary and I'm pretty sure the code is unavailable. Maybe some guru could get into it but I'm sure it is quite complex.
 
#71
Update

Code: 
Name		BPPBP	Sel.	64step	16step	Services	Status
brianco		1	1	1	1	SMT soldering	Shipped
astromo 	1	3	3	-			Delivered
Bennyboyph  	1	1	1	1	SMT soldering	Shipped
cowanaudio	1	-	-	-			Delivered
Quantensprung	1	1	1	1	SMT soldering
Mituisho	1	-	-	1			Delivered
shattered_dream 1	1	1	1			Shipped
Morde		1	-	-	1			Delivered
maartn		1	-	-	2	SMT soldering	Delivered
GfromG		1	-	-	-	SMT soldering	Delivered
pixelpusher 	-	-	1	1			Delivered
av-trouvaille  	-	1	2	-			Delivered
vasillis 	-	-	-	2	SMT soldering	Shipped
Johnny Canuck	-	1	2	-			Shipped
toastytoy	1	-	1	-			
Mike2		1	-	-	1	SMT soldering	Delivered
AlphaC		1	1	1	-			Delivered
ergo		-	-	1	1			Shipped
sebbyp		1	1	1	1			Shipped
grayblob	1	1	1	1			Delivered
outtek		1	1	1	1			
tjencks		2	-	-	-			Shipped
ItsAllInMyHead	1	1	1	1			Shipped
Total		19	14	19	17
As of today, all 60 boards paid for have been shipped. I still have two selector, three 64step, and a few BPPBP and 16 step boards. PM me if interested. I've run out of some parts, so unfortunately SMT soldering is not available at the moment.
 
Last edited:
#79
A note of caution to those building to 16 step controller. The encoder can be mounted two ways. Carefully check the circuit diagram and PCB layout to determine the right orientation (pin to hole mapping). I got it wrong way round and ended up scratching off copper tracks and soldering bypass wires...
 
You must log in or register to reply here.
  • Home
  • Group Buys
  • Interest in PCBs for Bruno Putzey's Preamp and Hans Polak's relay volume control
Top Bottom