My DLCP is stuck in Bootloader Mode. Not sure why that happened, I can't remember touching anything besides the volume control on the remote. I just changed from digital out from a Lynx AES sound card to a Xmos USB to SPDIF converter, but it would be weird if that had anything to do with it.
I tried updating to the new firmware. The update went fine but the unit didn't restart. I turned off and on the power. However, it's still frozen in Bootloader Mode.
Does anyone have a solution?
I tried updating to the new firmware. The update went fine but the unit didn't restart. I turned off and on the power. However, it's still frozen in Bootloader Mode.
Does anyone have a solution?
It has happened to me a couple of times. Updating/reinstalling the DLCP Control Firmware usually solves the problem.
Let us know if it helps!
Let us know if it helps!
Like mentioned in my previous post; I aready tried upgrading to the newest firmware without getting any further.
Perhaps there's a way to reset the board with pins.
Thank you Johan! Choosing "Control Firmware Update" and the file you sent me, got the DLCP back in business.
Time to work on EQing my small horns 🙂
Time to work on EQing my small horns 🙂
Does anyone know the reset procedure off hand?
I was trying to get ready to update mine and bricked it somehow, green LED not lighting. I remember an email from Jan Willem about J6 or JP5 I think, but I don't remember the exact reset procedure. If anyone has it can you post it here?
Thanks
I was trying to get ready to update mine and bricked it somehow, green LED not lighting. I remember an email from Jan Willem about J6 or JP5 I think, but I don't remember the exact reset procedure. If anyone has it can you post it here?
Thanks
I have not tried this myself, but this is the procedure:
To update the DLCP’s, with the fail-safe bootloader functionality;
Remove all power, USB cable, and turn off connected amplifiers
Get latest version of the DLCP firmware (see our website)
Please short pin4-5 of J6(program header) on the DLCP. You could use one of the jumpers, placed on J5/J8. (please take a look at the datasheet for pin numbering)
Apply power
Please wait a few seconds
To show it entered the bootloader mode, the DLCP will toggle the green led a few times.
After this, it will continuously toggle this led.
Please connect your USB cable now.
Remove the jumper on J6
Start Hypex Filter Design, it should prompt a message ‘Bootloader mode ‘ and goto download- Firmware update
Please select the firmware version and wait for it to finish.
To update the DLCP’s, with the fail-safe bootloader functionality;
Remove all power, USB cable, and turn off connected amplifiers
Get latest version of the DLCP firmware (see our website)
Please short pin4-5 of J6(program header) on the DLCP. You could use one of the jumpers, placed on J5/J8. (please take a look at the datasheet for pin numbering)
Apply power
Please wait a few seconds
To show it entered the bootloader mode, the DLCP will toggle the green led a few times.
After this, it will continuously toggle this led.
Please connect your USB cable now.
Remove the jumper on J6
Start Hypex Filter Design, it should prompt a message ‘Bootloader mode ‘ and goto download- Firmware update
Please select the firmware version and wait for it to finish.
Im planning to add another DLCP to my rig and run two DLCP on one input Board.
Anybody With experiences to share?
Anybody With experiences to share?
Yes, I would like to run eight channels through DLCP, and placed order for another board. I am curious if there are other users here with two DLCP's connected to the input board, and how it have worked out for you.
Suggestion for next Filter Designer: Please, at "Save As..." - preload the current open file and not the last saved file as suggestion for file name to be saved - or leave it blank.
//
//
I'm a little confused about one thing. There is some (little ) discussion of using a mic directly into the filter design software, but I see no way to implement that and it seems as if the current guidelines want you to use some other means of measurement and import the file.
Am I missing something, or is this just a feature that went away?
Alan
Am I missing something, or is this just a feature that went away?
Alan
It went away in the newest version of filter designer.
You will most likely do better measurements using REW, Arta or other dedicated software
You will most likely do better measurements using REW, Arta or other dedicated software
using REW, got it. oh, and these mics that happen to be hanging around, 4133 and 4134 or some such thing. 🙂
Cheers
Alan
Cheers
Alan
I take it you mean this one
Hypex Filter Design V3.02 beta
?
I see others got an error when it tries to copy to the program folders with win7 64 (ie install), I also got an error, but see the .exe will run when directly accessed. Any known problems here?
Is there a corrected installer or as it says "beta"? (translates as user beware 🙂 )
I don't have the dlcp yet, it is on its way, just trying to get my ducks in order.
Alan
Hypex Filter Design V3.02 beta
?
I see others got an error when it tries to copy to the program folders with win7 64 (ie install), I also got an error, but see the .exe will run when directly accessed. Any known problems here?
Is there a corrected installer or as it says "beta"? (translates as user beware 🙂 )
I don't have the dlcp yet, it is on its way, just trying to get my ducks in order.
Alan
Last edited:
It seems that the guys from Hypex are not able to get the software working 100%
The announced FIR-Filter feature is also ignored, i bought two dlcp for that in the first place!
The announced FIR-Filter feature is also ignored, i bought two dlcp for that in the first place!
I'm hoping this will be a better solution:
http://www.diyaudio.com/forums/digi...-integrated-preamp-crossover-dac-project.html
I'm not directly dissatisfied with DLCP. Mine is stable and the sound quality is quite close being transparent. But the software need a lot of improvement, there's no peak meter on in and out outputs , no FIR filters and it seems it will never see the daylight either and when using two boards there are a lot of issues based on other experiences. I haven't connected two boards myself yet, but plan to do so.
http://www.diyaudio.com/forums/digi...-integrated-preamp-crossover-dac-project.html
I'm not directly dissatisfied with DLCP. Mine is stable and the sound quality is quite close being transparent. But the software need a lot of improvement, there's no peak meter on in and out outputs , no FIR filters and it seems it will never see the daylight either and when using two boards there are a lot of issues based on other experiences. I haven't connected two boards myself yet, but plan to do so.
We're working on a full new softeware package! We're close to have a first internal BETA version. After this is stable we can go for a customer BETA version.
Please do have some patience...🙄