• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Huge Lot of Parts For Sale

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I have the following parts for sale (TAKE IT ALL PRICE NOW $175USD with Free Shipping to Lower 48 & Canada) :

6 Elna Silmic II Polarized Capacitors (4-47uF 50V/2-1000uF 16V)

5 Nichicon KA 105C Audio (3-4700uF 16V/1-220uF 25V/1-47uF 16V)

24 Nichicon Non-Polarized MUSE (2-220uF 25V/8-220uF 16V/6-47uF 25V/4-47uF 16V/4-4.7uF 50V)

1 Nichicon Fine Gold 220uF 10V

3 Nichicon UPW 105C Low Impedance-Long Life Polarized Caps (3-470uF 16V)

1 Panasonic (Mashusita) 100uF 25V NP Cap.

2 MPSU57 Transistors
15 Small Anti-Static bags
1 35Amp 800V Hi-Power Diode Bridge
10 2Amp 800V small Diode Bridge
2 Positive Regulator (317 Type)
2 Negative Regulator (337 Type)
5 Misc Small Heatsinks
LOT of >100 Fuses - Various Ratings
Lot >100 3/16" & 1/4" Male (Blade) Circuit Board Terminals

4 DIY 3' long Alligator Clip to Aligator Clip cables
10 NEW Alligator Clips New in Bag
2 4" Banana Jumpers
2 Solen Crossover Board Stereo Connector
7 Dual Banana Plugs (Red)
4 Single Heavy Duty Banana Plugs
40 5-Way Binding Posts
8 Other 5-Way Binding Posts (White/Red/Black)
24 Nakamichi Banana Plugs (Mostly NEW/a few Mint)

1 20Ft Balanced XLR(M) to XLR(F) Shielded Microphone Cable
1 50FT Balanced XLR(M) to XLR(F) Shielded Microphone Cable
1 6FT 1/4" to XLR(F) Shielded Microphone Cable
1 3Ft 1/4" to 1/4" Microphone/Pro Shielded Cable

1 20 Ft Single RCA to RCA shielded Video Cable with quality RCA's
1 Pair NEW 2' Redco Mogami 2524/Neutrix Analog Cable Balanced to SE cables $25USD/pair
2 6FT BNC to BNC Shielded Hi-Quality Digital/Video Interconnect
1 BNC to RCA Shielded Adapter Cable

4 Hospital Grade 3' 3X16AWG Power Cord with IEC connector
1 Power Cord 2 Pole 5' IEC Connector (No ground pin)
1 NEW Power Cord Male to Female (Medical Grade IEC C14)

8 Thick Tube Dampners (for 6sn7 Tubes etc.)
6 Chromed Cones with Removal Tip (1-1/2" Diameter X 1-1/4" High with adhesive backing)

1 Small Speaker Terminal Plate with Pre-Drilled Holes
2 Metal Boxes (Heavy Gauge) with 8 pre-drilled holes for Binding Posts 8-1/2"W x 3-3/4"H x 6-1/2"D (Used for Emerald Physics Speaker Crossover Boxes)
13 Large Male Grille Connectors
4 Smaller Grille Cups
16 Misc Stereo Component Feet
12 10" Long Heavy Duty 1/2" Glue Sticks
LOT 0.110/.250 Speaker Terminal Female Connectors (>50) with Red/Black Jacket
30 1/4" Threaded Nuts for (Speaker/Cabinet/Feet)
15 Misc 1/4" Bolts

1 Tube/Syringe Silver Oxide heat Sink Compound
1 Chip Quik SMD I.C. Remover
1 Jar Heat Sink Compound (Half Full)
2 6.225/6.25 Ohm 50 Watt Power Resistors Mounted on Heatsinks with Cables

1 Behringer Phantom 48V/12V Interface with Power Supply
1 Behringer ECM-8000 - Needs adjustment/repair
1 Unknown Microphone with RCA Output
1 Radio Shack Analog Sound Meters - Extended neck/microphone
1 Stereo 1/4" to 1/8" stereo Adapter

2 Rocketfish AC Travel Charger (mini-USB) - for Mini-DSP Power Supply
2 Theta DaViD (Pioneer DV-424) DVD/CD Drive/New Laser assembly installed
1 Pioneer DV-424 ( Theta DaViD) Remote
1 Used working Theta DaViD Laser Assembly

Note a few items in photos have been sold..... the above list is ACCURATE for what you receive.


Take it ALL that is listed above for $175USD with Free Shipping to LOWER 48 and CANADA

PayPal for US & Canada & E-Transfer for Canada




NOTE: For ALL other countries (because of weight of the above LOT of Parts) it may be prohibitive to ship but looking in the range of an additional $50USD and 2-4 weeks delivery.
 

Attachments

  • 20200101_132309-min.jpg
    20200101_132309-min.jpg
    682.4 KB · Views: 515
  • 20200101_132243-min.jpg
    20200101_132243-min.jpg
    676.9 KB · Views: 508
  • 20200101_132238-min.jpg
    20200101_132238-min.jpg
    881.7 KB · Views: 512
  • 20200101_132223-min (2).jpg
    20200101_132223-min (2).jpg
    428.3 KB · Views: 493
  • 20200101_132218-min (2).jpg
    20200101_132218-min (2).jpg
    814.9 KB · Views: 491
  • 20200101_132147-min.jpg
    20200101_132147-min.jpg
    552 KB · Views: 114
  • 20200101_132124-min (2).jpg
    20200101_132124-min (2).jpg
    673.7 KB · Views: 110
  • 20200101_132110-min.jpg
    20200101_132110-min.jpg
    816 KB · Views: 114
  • 20200101_132058-min.jpg
    20200101_132058-min.jpg
    513 KB · Views: 123
  • 20200101_132021-min.jpg
    20200101_132021-min.jpg
    720 KB · Views: 149
Last edited:
  • LOT 0.110/.250 Speaker Terminal Female Connectors (>50) with Red/Black Jacket - $5USD for LOT
  • 30 1/4" Threaded Nuts for (Speaker/Cabinet/Feet) $5USD for 30
  • 19 5/8" (11 Threads per Inch) Flanged NUTS ( for Threaded Rod Stereo Stand etc.) $9USD for 19

  • 1 Tube/Syringe Silver Oxide heat Sink Compound -$2USD
  • 1 Chip Quik SMD I.C. Remover - $3USD
  • 6 Chromed Cones with Removal Tip (1-1/2" Diameter X 1-1/4" High with adhesive backing - $15USD for 6
    • 4 DIY 3' long Alligator Clip to Aligator Clip cables - $4USD for 4
    • 10 NEW Alligator Clips New in Bag - $3USD for 10
    • 2 4" Banana Jumpers - $1USD for 2
    • 30 1/4" Threaded Nuts for (Speaker/Cabinet/Feet) $5USD for 30
    • 2 6.225/6.25 Ohm 50 Watt Power Resistors Mounted on Heaqtsinks with Cables - $5USD for 2
  • 1 35Amp 800V Hi-Power Diode Bridge - $3USD for 1
  • 10 2Amp 800V small Diode Bridge - $3USD for 10
  • 5 Misc Small Heatsinks - $2USD for 5
  • Lot 10 Small reels of Hookup Wire (12 to 22AWG) - $15USD for 10 reels
  • 40 5-Way Binding Posts - $10USD for 40

I will take all of these if you include shipping.
 
Last edited:
Sent you a PM

  • LOT 0.110/.250 Speaker Terminal Female Connectors (>50) with Red/Black Jacket - $5USD for LOT
  • 30 1/4" Threaded Nuts for (Speaker/Cabinet/Feet) $5USD for 30
  • 19 5/8" (11 Threads per Inch) Flanged NUTS ( for Threaded Rod Stereo Stand etc.) $9USD for 19

  • 1 Tube/Syringe Silver Oxide heat Sink Compound -$2USD
  • 1 Chip Quik SMD I.C. Remover - $3USD
  • 6 Chromed Cones with Removal Tip (1-1/2" Diameter X 1-1/4" High with adhesive backing - $15USD for 6
    • 4 DIY 3' long Alligator Clip to Aligator Clip cables - $4USD for 4
    • 10 NEW Alligator Clips New in Bag - $3USD for 10
    • 2 4" Banana Jumpers - $1USD for 2
    • 30 1/4" Threaded Nuts for (Speaker/Cabinet/Feet) $5USD for 30
    • 2 6.225/6.25 Ohm 50 Watt Power Resistors Mounted on Heaqtsinks with Cables - $5USD for 2
  • 1 35Amp 800V Hi-Power Diode Bridge - $3USD for 1
  • 10 2Amp 800V small Diode Bridge - $3USD for 10
  • 5 Misc Small Heatsinks - $2USD for 5
  • Lot 10 Small reels of Hookup Wire (12 to 22AWG) - $15USD for 10 reels
  • 40 5-Way Binding Posts - $10USD for 40

I will take all of these if you include shipping.
 
Lowered Price to $319 for ALL with Free Shipping

I have the following parts and stereo components for sale:

1 Behringer Phantom 48V/12V Interface with Power Supply - $9USD
1 Dayton EMM-6 Calibrated Microphone with Case - $19USD
1 Behringer ECM-8000 - Needs adjustment/repair with Case - $5USD
1 Unknown Microphone with RCA Output - $5USD
1 Radio Shack Analog Sound Meters - Extended neck/microphone - $29USD
1 Spare Behringer Microphone Case - $1USD
1 Stereo 1/4" to 1/8" stereo Adapter - $2USD

1 20Ft Balanced XLR(M) to XLR(F) Shielded Microphone Cable $7USD
1 50FT Balanced XLR(M) to XLR(F) Shielded Microphone Cable $9USD
1 6FT 1/4" to XLR(F) Shielded Microphone Cable $2USD
1 3Ft 1/4" to 1/4" Microphone/Pro Shielded Cable - $2USD
Lot 10 Small reels of Hookup Wire (12 to 22AWG) - $15USD for 10 reels

1 20 Ft Single RCA to RCA shielded Video Cable with quality RCA's - $5USD
1 Pair of NEW 10" Schiit Audio (Straight Wire) Analog Cables - $10USD/Pair
1 Pair NEW 2' Redco Mogami 2524/Neutrix Analog Cable Balanced to SE cables $25USD/pair
2 6FT BNC to BNC Shielded Hi-Quality Digital/Video Interconnect $3USD each
1 BNC to RCA Shielded Adapter Cable - $1USD

5 Hospital Grade 3' 3X16AWG Power Cord with IEC connector - $29USD for 5
1 Power Cord 2 Pole 5' (No ground pin) - $1USD
1 NEW Power Cord Male to Female (Medical Grade IEC C14) - $1USD

4 DIY 3' long Alligator Clip to Aligator Clip cables - $3USD for 4
10 NEW Alligator Clips New in Bag - $2USD for 10
2 4" Banana Jumpers - FREE
2 Monster Cable Male Single RCA to Dual Female RCA adapter $3USD for 2
2 Solen Crossover Board Stereo Connector - $1USD for 2
7 Dual Banana Plugs (Red) - $5USD for 7
4 Single Heavy Duty Banana Plugs - $5USD for 4
40 5-Way Binding Posts - $9USD for 40
30 Nakamichi Banana Plugs (Mint/NEW) - $15USD for 30

2 MPSU57 Transistors - $2USD for 2
10 Small Anti-Static bags - FREE
LOT of MPS8099 & MPS8599 (~40 units) Small Signal Transistors - $8USD for 40
1 35Amp 800V Hi-Power Diode Bridge - $3USD for 1
10 2Amp 800V small Diode Bridge - $3USD for 10
2 Positive Regulator (317 Type) $1USD for 2
2 Negative Regulator (337 Type) $1USD for 2
5 Misc Small Heatsinks - $2USD for 5
LOT of >100 Fuses - Various Ratings - $9 for LOT
Lot >100 3/16" & 1/4" Male ( Blade) Circuit Board Terminals $2USD for LOT

1 TCC TC-750 MM Phono Preamp with Power Supply - $39USD
1 Pair of Genexxa Pro 7 (RS Minimus 7 Updated) Speakers - $39 USD/pair
1 Niles SPS Speaker Switching Box 4 speakers capability - $15USD
2 Rocketfish AC Travel Charger - used for MiniDSP Power Supply - $5USD each
2 Theta DaViD (Pioneer DV-424) DVD/CD Drive with new Laser assembly installed - $10USD each or $15USD for 2
1 Pioneer DV-424 ( Theta DaViD) Remote - $9USD
1 Used Theta DaViD Laser Assembly - $1USD
8 Thick Tube Dampners ( 6SN7 Tubes etc.) $5USD for 8
1 Set - Neutrik XLR Male/Female Connector - $3USD for Set
10 Misc EMI/RFI Ferrite Slip-On Filters - $7USD for 10
6 Chromed Cones with Removal Tip (1-1/2" Diameter X 1-1/4" High with adhesive backing) - $15USD for 6

LOT of Shrink Tubing - Various Sizes - $4USD for LOT
1 Small Speaker Terminal Plate with Pre-Drilled Holes - $1USD
2 Metal Boxes (Heavy Gauge) with 8 pre-drilled holes for Binding Posts 8-1/2"W x 3-3/4"H x 6-1/2"D $9USD each
13 Large Male Grille Connectors - $1USD for all 13
4 Smaller Grille Cups - $1USD for 4
11 Circular 1/8" Thick Metal Plates (for Emerald Physics EPX/KC-II) for 8" Coaxial Driver Mounting (Holes @ 9" Diameter; 9-1/4"OD x 7-1/4"ID) $2USD each or $18USD for all 11
16 Misc Stereo Component Feet - $2USD for 16
12 10" Long Heavy Duty 1/2" Glue Sricks - $4USD for 10
LOT 0.110/.250 Speaker Terminal Female Connectors (>50) with Red/Black Jacket - $5USD for LOT
30 1/4" Threaded Nuts for (Speaker/Cabinet/Feet) $4USD for 30
15 Misc 1/4" Bolts - $1USD for 15
50 #8 X 1" long Pan Head Wood Screws - $3USD for 50
19 5/8" (11 Threads per Inch) Flanged NUTS (for Threaded Rod Stereo Stand etc.) $9USD for 19

1 Tube/Syringe Silver Oxide heat Sink Compound -$2USD
1 Chip Quik SMD I.C. Remover - $3USD
1 Jar Heat Sink Compound (Half Full) - $3USD
2 6.225/6.25 Ohm 50 Watt Power Resistors Mounted on Heatsinks with Cables - $5USD for 2

Take it all for $319USD with Free Shipping to Lower 48 and Canada

PayPal for US & Canada & E-Transfer for Canada

25% Discount shipping under $100 USD
50% Discount over $100 USD and under $250 USD
FREE Shipping over $250 USD
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.