hi new to the forum and new to modding.i bought a t amp and mod kit from audio magus i rerouted the rcas along with the other mods and the amp only works for a second upon shut off.can any one help me with this problem.
Hi, welcome to the forum.
Can you give a few more details? How does it shut down? Do you get a clicking sound? Does the LED stay on? Both channels the same?
You may have a short to ground at the outputs. That would be the first place to check.
Can you give a few more details? How does it shut down? Do you get a clicking sound? Does the LED stay on? Both channels the same?
You may have a short to ground at the outputs. That would be the first place to check.
thanks for getting back to me.when it powers up there is no sound.as i turn the unit off there is music fo a second then dead.i did the mods that you supplied for the kit.i used the first set of instructions .i grounded out the right and left rca wires under the board. i think i messed up grounging somewhere can you tell me how to check it?
here is what happens.upon turn on it lights up but nothing else happens.when it shuts down it plays for a second.
- Status
- Not open for further replies.